outlaw products
Nissan Skyline RB20/RB25 Turbo, Braided Water Line & Silicone Elbow
NISSAN Skyline RB20/RB25 Turbo
These turbos have been manufactured specifically to
suit RB20DET and RB25DET applications. They are upgraded units which
have been tested to 420bhp. They fit the standard cast exhaust manifold
in the low mount position and only require the fitment of new braided
water line and a 90 degree silicone outlet pipe which are included with
the turbocharger, with the addition of these this item is a bolt on
upgrade.
Turbocharger Specs:
- 53mm compressor wheel
- 48.7mm exhaust wheel
- T3 single scroll flange
- 2 inch compressor outlet
- A/R .50
- 360 degree thrust bearing
- 6 bolt skyline flange to turbo elbow
What do I gain over using a standard turbo?
These turbos are oil and water fed which is the same set up as the standard units, this being the case it allows you to retain all of the standard pipework without blanking anything off. The wastegate is larger than standard by 30%, this allows exhaust pressure to escape from the turbo faster to allow a higher level of boost. The actuator is aftermarket and allows a higher amount of boost pressure into the turbo.
Overview.
If you are looking at a sensibly priced means of extra BHP on your vehicle and dont want to change a huge amount of parts in your engine bay, these turbos are perfect for that application. Mapping will be required once fitted due to the larger actuator and the boost capabilitys of this turbocharger.