#R5 VINTAGE 1960's Black COX Mark 4 with 15 ohm resistor, SLOT CAR CONTROLLER.
NOTE: Look at pics for close-up views.
Scarce Original 1960 Mark 4 (mark IV) 15 Ohm Ruby Red Hand Controller by COX Mfg #3450 1/24th scale 1/24 scale.
This controller outperforms and outsells all others in its
class. The black pistol grip handle is comfortable to hold and is amply vented
for rapid heat dissipation. A 15 OHM taper wound resistor permits smooth
acceleration and response. Plunger is thumb actuated and has a
silver-impregnated graphite brush slider for maximum electrical and mechanical
efficiency. Cooling fins on the plunger shaft maximize heat dissipation. A
flexible and easily replaced fuse wire protects the resistor from burnout
resulting from improper hookup. Connecting cable terminates in color coded wire
leads and alligator clips. A flexible cord protector minimizes chafing and wear
of cable where it passed through the controller case.
Cat # 3450 Color: Red.
NOTE: I have 7 different red controllers R1 - R7. This offering is for the Number in the first line #R number you see above. The others are in separate offering. Please look them up if you are looking for more than 1 controller Thanks.
The picture shows my other controllers, Multi group of controllers IS NOT in this Offering, "ONLY" one in each offering, seven different offerings.
This auction is for a 1960's
MADE IN THE 1960'S.
Will fit 1/32nd or 1/24 scale. Very cool and rare find.
These items were used on motors in car brands like Le Mans Unique, Revell, K & B, Monogram, Classic Mfg., Cox, Strombecker, Riggens, Garvic, Testors, Eldon, AMT, Russkit, MPC, BZ, Atlas, Kal-Kar and More.
vintage 1960's Slot Car very scare made special for Vintage Slot Car Racing.
How to Pick the Right Controller
The controller has an enormous job to do--control the car, and
absorb or dissipate the heat generated by its resistance. Since all motors vary
in the amount or resistance in the armature, the same controller is available in
varying OHM ratings.
The rule of thumb is: the HOTTER the motor, the lower OHM rating
controllers work best. HO cars, 1/32 cars in sets and some older 1/32 and 1/24
car kit cars use medium to high OHM controllers. The latest motors and rewinds
use the 15 OHM rated units.
The following chart suggests what motors will operate best on what
OHM controllers. You can work from there.
15 OHMS or less:
Can type 300B, 500B, 600B, Pittman DC84, DC65-6 volt, Kemtron 6
volts, K & B Super Challenger, Atlas 6 volt, Glove SS-91, and similar "hot"
motors and rewinds.
25 OHMS or less:
Pittman DCI96B, Can type 600A, Kemtron 8-10 volts, Strombecker
Avenger, K & B Challenger, Strombecker Devastator, Pittman DC706, Ram 850,
426, Strombecker Destroyer, Hustler and similar motors including 1/32 - 1/24
scale car kits.
Over 45 OHMS:
Strombecker Scuttler, Pittman DC 65-12, Wilson 876-13, Kemtron
12-18 volt motors, all 12-18 volt motors in 1/32 & 1/24 scale ready to run
sets. The "normal" type motors for long, smooth, dependable
operation.
85 OHMS:
For HO cars of all types.
OLD STOCK, MADE IN THE 1960'S.
Will fit 1/32nd, 1/24th & 1/25th scale. Very cool and rare find.
See pictures.
Cox
The
greatest name in vintage slot cars collecting. Cox built the best quality cars
and kits from 1964 to 1969 and today's collectors appreciate that quality. Cox
sold their cars in RTR and kit form as well as parts. Body and chassis kits,
wheels, tires, motors, axles, guides and gears were all sold separately. The
kits are especially cherished but the factory-assembled RTR cars in their
original boxes are also highly valued. A Blue Chip invesment.
My Dad owned a Hobby Shop that closed in the early 1970's, and
he kept some of the more interesting slot cars and accessories from that era.
The items I am listing are in most cases, near new or gently used. I have taken
many pictures to show every angle and have tried to describe all features and/or
flaws to the best of my ability. Please email with any questions specific to
something I may have missed. Please check my other auctions as I will be selling
many cars, accessories and track in all three scales-- HO, 1/32nd, and 1/24th.
If you don't see the car or part you are looking for, please email me. If I
have it, I will list it for you. Many of the items in my inventory are NEW
OLD STOCK.
PLEASE CHECK PICTURES
CLOSELY.
These item(s) fit past
and present chassis, frames from car brands like Le Mans Unique, Revell, K &
B, Monogram, Classic Mfg., Cox, Strombecker, Riggens, Garvic, Testors, Eldon,
AMT, Russkit, MPC, BZ, Atlas, Kal-Kar, Parma, Pro Slot, Carrera Cars,
Scalextric, Fly Cars, Koford, Black Diamond Slot Car, Sonic, GT1, Koford Group
7, WRP, Pro Stock, Toytech, Speed Secrets Predator II , Pro Track "Magnum", Drag
Slot Car, Elite, Champion Turbo-Flex Chassis, Rhino, Outisight , JK, and more
great New and Old Stock (NOS) chassis.
These items
come from a non-smoking
environment.
Please look carefully
at the pictures. We do out best to accurately describe each item, condition of
the item and any defects.
What you see in the picture is
what you are bidding on.
"SOLD AS IS, AS
PICTURED"
If you have any
questions regarding shipping or the item, please email us BEFORE you bid or
buy.
The Shipping/Handling
Fee, includes our cost for packaging materials, postage and Delivery
Confirmation, but NOT
insurance.
Fees shown are for
USA Delivery ONLY. All Payments must be through
PAYPAL.
**FOREIGN
BUYERS must email for correct shipping fees BEFORE
PAYING FOR YOUR ITEMS** PLEASE NOTE: Foreign
Buyers- -Regarding Shipping Fees for all Non USA winners:
Because Ebay does not let us put in shipping fees for all countries, the
shipping fee you see on our auction is an average and NOT the correct fee
for your country. Some countries are much lower and some are higher. Please
email us for your correct shipping fee BEFORE you pay. Rest assured, if we ever
over-estimate the shipping fee we always refund any excess back to
you.
We are happy to combine
shipping when possible, BUT you must email us, BEFORE THE AUCTIONS CLOSE,
to notify us that you are buying more than one item, so we can save you
money on shipping by combining all items on one invoice.
***IF YOU WIN MORE THAN ONE
AUCTION AND WOULD LIKE TO COMBINE SHIPPING TO SAVE
MONEY***
Do not pay until you:
1. Contact me letting me know
2. Request an
invoice before paying
3. Pay only after you receive the
invoice
By letting me know and requesting an invoice prior to
paying, you are ensuring that you will save money on shipping and will receive
all items in one shipment!
If we ever over-estimate the
shipping charge we refund all excess to you.
RETURNS: Items must be returned in original
packaging with Delivery Confirmation. Refund for purchase price of item will be
issued. Sorry we cannot issue a credit for shipping
fees.
THANKS FOR LOOKING AND HAPPY
BIDDING!!