This was fitted to a custom frame with an 1100slingshot motor, but it had to fit close to the front tubes, you can see where we started to trim the tank cover to move it back. I curved a used cooler to fit; turned out the frame was made for a stock curved cooler. So this has had the lower mounts altered and been bolted in place but never used. The hoses are also unused.
Threads are all dash 8. Hose lengths: between ends of compression nipples are 22-1/4" and 23-1/4". There will be around an inch and a quarter between the nipples and the centreline of the 90º fittings and approximately a quarter of an inch between the nipple and the cone at the 180º ends. Did I make that sound very complicated? Fittings are swivel type.
Free postage is mainland UK only.