Team Losi Racing 22T 3.0 1/10 2WD Electric Stadium Truck Kit

TLR03011

The championship-winning 22 platform saw major revisions with the release of the 22 3.0 buggy. The 22T 3.0 stadium truck benefits from the same level of innovation. Plus, many parts that were considered optional on the 22T 2.0 are now included so you can build to team spec right out of the box.

In-Depth Features:

Revised Motor Location: As with the 22 3.0 buggy, the 22T 3.0 motor location is 12mm closer to the diff gear than it was in the previous version. This increases the rear weight bias, providing better rear grip on exit, more entry steering and a truck that, overall, is easier to drive.
3-Gear Transmission: The new 3-gear transmission decreases chassis roll, greatly improving the vehicle's stability, consistency and braking. A 4-gear transmission is available separately for lower-grip tracks and different driving styles.
Revised Front Suspension Geometry: All-new front caster blocks and suspension arms allow for variable length arm adjustment. This, together with the bell crank steering system, provides the same amazing steering 22 drivers have come to love, but with a more consistent feel between different surfaces. It all adds up to a truck with neutral balance that requires less tuning from track to track to maximize performance.
Revised Rear Suspension Geometry: The rear pivot is 2mm wider for better rear grip and stability without losing any corner speed. The rear arms and shock towers have revised shock mounting locations. The jumping, landing, and chassis roll dynamics of the rear end have been optimized for a higher rear weight bias percentage.
Adjustable Toe and Anti-Squat: As with the 22 3.0 buggy, the rear pivots use inserts for adjusting the rear toe and anti-squat. This makes it easy to quickly adjust geometry without having to buy additional parts. The rear toe can be adjusted in 0.5 degree increments from 2.5 to 4.0 degrees. Rear anti-squat adjustments range from 0.0 to 3.0 degrees.
Aluminum-Plate Rear Hub: The hub base is molded composite, allowing a bearing to be press fit without play and minimal unspring weight when compared to an all-aluminum hub. The aluminum plate is secured to the hub with an M3 screw and ball stud, which is vertically adjustable. Now the ball stud is supported by aluminum from pushing or pulling out, while still threading into composite so it cannot work loose.
Transverse Battery Mounting: The wider, 2.5mm aluminum chassis and molded mud guards include the option to mount saddle and shorty Li-Po packs across the chassis. Shorty Li-Po packs can also be mounted fore to aft. This allows for more weight bias tuning front to rear and wider placement of battery weight. The result is a more stable truck without an increase in static weight.
HDS Slipper with HD Spring: The 22T 3.0 includes Heavy Duty Slipper (HDS) pads and 82T HDS spur gears as well as grooved and tapered slipper plates. The biggest improvement comes with the HD slipper spring that offers a wider range of adjustment. It also makes the slipper more consistent.
Included Option Parts: Popular upgrade parts are included so owners can build a pro-level truck right out of the box. These include milled, 7075-T6 aluminum parts like the top shaft, adjustable rear pivot mounts, motor plate, rear camber block, shock bleeder caps and ball stud spacers throughout. Machined shock pistons and bushings, Ti-CN coated shock shafts and hinge pins, C3 spec hub bearings and low frequency springs are also included.
Shared Parts Compatibility: All the key 22T 3.0 suspension components are identical to those used on the 22SCT 3.0. Racers who run both vehicles won't need to keep as many spare parts and can swap parts between vehicles if needed.

Features:

Based on the championship-winning 22 3.0 buggy
Revised mid-motor mounting location
Revised front and rear suspension geometry
3-Gear transmission for better acceleration and grip
Aluminum-plate rear hub
HDS Slipper with HD Spring
Lightweight 7075-T6 aluminum chassis
Gen II 12mm big-bore shocks
Transverse battery mounting option
TLR® pre-cut body
Many popular option parts included as standard
Shares many key suspension parts with the 22SCT 3.0

Specifications:
Type: 2WD Stadium Truck
Scale: 1/10
Length: 15.8 in (400mm)
Width: 12.7 in (322mm)
Height: 5.65 in (143mm)
Wheelbase: 11.3 -11.4 in (286-290mm)
Weight: Varies with Equipment Used
Chassis: 2.5mm 7075-T6 Aluminum
Suspension: Lower A-Arm, Upper Adjustable Link
Drivetrain: 2WD
Motor or Engine: 540 size Not Included
Speed Control: Not Included
Radio: Not Included
Servos: Not Included
Batteries: Not Included
Charger: Not Included
Gear Pitch: 48P
Wheel Size: 2.20 in (56mm) x 1.90 in (48mm)
Kit/RTR: Kit
Shock Type: 12mm Big Bore, Oil Filled
Body: 22T 3.0, unpainted polycarbonate
Ball Bearings: Full Rubber Sealed Ball Bearings
Experience Level: Advanced
Recommended Environment: Outdoor
Assembly Time: 3-5 Hours
Is Assembly Required: Yes

Needed To Complete:

Electronic Speed Control
Servo
Tires
Radio System
48 Pitch Pinion Gear
Charger
Battery
Paint

Note: Completed vehicle shown for illustrative purposes only and is not included.

Brand New in the Package!!

Visit My eBay Store: World of RC Parts

Brand New in the Package!! Visit My eBay Store: World of RC Parts Check out my other items! Be sure to add me to your favorites list! My Stores Logo From collectibles to electronics, buy and sell all kinds of items on eBay StoresStores Sign up for my email newsletters by adding my eBay Store to your Favorites <* PAYMENT OPTIONS: We accept PayPal, and PayPal accepts VISA, MasterCard, Discover, American Express, and bank accounts. Please include your shipping address with your payment. If payment is not received within 5 days, your item may be made available to other bidders.> <* COMBINED SHIPPING: We combine shipping on multiple orders. All items must be paid for with a single payment for the combined shipping rate. You will be charged the full shipping charge for each item if separate payments are made.> <* DOMESTIC SHIPPING: Buyers in the Continental United States, Alaska, Hawaii, and Puerto Rico will pay Rate for the first item and up to $2.49 for each additional item. Packages will ship via First Class Mail, Priority Mail or Media Mail depending on the weight, size, and contents of the package. USPS Delivery Confirmation Number will be sent to you in your Ebay messages with all domestic orders. Any purchase $200.00 or more will be shipped with Signature Required Upon Delivery. We strive to ship every item we sell as quickly as possible. Unfortunately, we have no control over what happens to a package once it leaves our facilities. The majority of domestic packages will arrive within 2-10 business days. It is a rare occurrence but occasionally packages will be lost. We will work with you to resolve the issue, but we cannot file a claim for a lost package until 30 days have passed. By purchasing an item from us, you agree to allow 30 days for your package to arrive.> <* INTERNATIONAL SHIPPING: We will ship worldwide with USPS First Class International or Priority Mail International depending on the weight, size, and contents of the package. It is the buyer's responsibility to pay all extra fees associated with importing any items purchased from us. You will need to check with your local customs office to determine what taxes will be owed and whether you can legally import the item. It is important that you do this before you bid. We strive to ship every item we sell as quickly as possible. Unfortunately, we have no control over what happens to a package once it leaves our facilities. The majority of airmail packages will arrive within 10-20 days. It is a rare occurrence but occasionally packages will be lost. We will work with you to resolve the issue. By purchasing an item from us, you agree to allow 45 days for your package to arrive.> <* STOCK STATUS: We are a Full-Time Brick and Mortar Hobby Shop. Inventory levels are subject to change based on in store and/or distributor stock levels!>