Car 12v DC 5v USB-A converter-adapter cable lead
—for 5v Snoopers using the 3.0mm DC plug
eg. Snooper S2000, Strabo etc. 
  1. Car-USB convertor
    - 12v DC IN
    - 5v 3A USB OUT
  2. USB-A to DC power-cable
    plug 3.0mm/1.1
    18AWG wire for <3A power (15W)
    length 120cm (1.2m)
  3. Fuse-Kit:
    1x ATO/ATC inline fuse-holder
    2x 3A ATO fuses
  4. 2x 'Skotch-Lok'-type IDC splicing-connectors

MAKE SURE TO TEST YOUR SET-UP
—BEFORE INSTALLING BEHIND THE DASH OR SIDE-PANEL...

to suit these Snooper models...:

  • S2000-series
    - Syrius
    - Ventura
    - TruckMate
  • Syrius SNP500
  • S360, SNP360
  • S370, SNP370
  • Indago
  • Strabo
  • Sapphire 5v
  • Syrius, Syrius Plus, Syrius ProLine
    - S6000
    -     SNP600
    -     S600
    - S600+Plus
This device will not work with:
(this is because those devices (and some others), use specific resistance-identification modes
when connecting to USB; —the resistance is not available on standard USB
power-sources (like this), and so will not charge...)


A useful rule of thumb is that if your device will only work with the charger &/or cable
made for it by the manufacturer, then it probably won't work with this power-source.
Positive feedback rating  eBay feedback...:
NOTE: one of our pix shows the fuse-kit fitted,
and the supply-wires fitted with crimped fork-connectors;
—this is just to illustrate a typical installation,
but we only supply all the fuse/fitting parts loose as a DIY-kit for you to install