Digital DDS Function Signal Generator Sine Square Sawtooth Triangle Wave Module

• 100% brand new and high quality
• After all the installation, connect the power supply，right adjust the resistance 10K and you will see the character.
• Adjust the character to clear type.
• This signal generator has two outputs - one for DDS signal and another for high speed [1,2,4,8MHz] square signal
  - which may be used for reliving microcontrollers with wrong fuse settings or for other purposes as well. High speed (HS)signal is direct output from Atmega16 OC1A(PD5) pin.
•  DDS output is used for all other signals that are generated via R2Rresistor network and is adjusted via LM358N offset and amplitude regulating circuits. Offset and amplitude can be regulated by two potentiometers. Offset can be regulated in range +5V..-5V while amplitude in range 0..10V. DDS frequency range is from 1 to 65535Hz that is more than enough for testing audio circuits and other tasks.
  Main AVR DDS signal generator features:
• Simple circuit with easily accessible and cheap components;
• Dedicated high speed (HS) signal output up to 8MHz;
• DDS signal with variable amplitude and offset;
• DDS signals: sine, square, saw, rev saw, triangle, ECG and noise.
• 2×16 LCD menu;
• Intuitive 5 button keypad.
• Frequency adjusting steps: 1, 10, 100, 1000, 10000Hz;
• Restoring last configuration after power up.
• In the block diagram you may see logical structure of signal
  generator:
  
  As you can see device requires several voltages: +5V, -12V, +12V, GND. -12V and +12V are used for offset and amplitude control. In this case power supply is constructed by using simple transformer and few voltagere gulators,
  et:7812,7912,7805.
  
  LCD menu control
  All actions can be viewed in LCD menu. Menu can be
  controlled with 5 buttons that are next to LCD module.
  　
• Up and down arrow buttons are used for browsing menu while right and left arrow buttons are used for changing frequency value. When middle button is pressed - signal generating starts. Press middle button again to stop signa generator.
• Important to notice, that there is a separate menu for changing frequency step. This is convenient if you need to change generator frequencies in wide range. This allows to set any frequency with relatively few button clicks.
• Noise generation don’t have frequency setting. It uses simple rand function where results are continuously output to DDS output.
  High speed signal has four frequencies available: 1, 2, 4 and 8MHz.
  Circuit diagram of DDS generator is very simple with easy accessible components. It uses following parts:
  · AVR Atmega16 microcontroller clocked with 16MHz external crystal;
  · Standard HD44780-based 2×16 LCD module;
  · R2R DAC made of simple resistors(1% tol);
  · LM358N low power dual op amplifier;
  · Two potentiometers;
  · 5 buttons;
  · several connectors and sockets.
  We offer a programmed IC and all components in the suite.

• 1 x DDS Function Signal Generator Module Sine Square Sawtooth Triangle Wave DIY KIT DIY Kits, not soldered,

• We accept payment through Paypal ONLY.
  
  If you do not have Paypal account, please registered with (http://www.paypal.com)  Payment must be received within 5 days after auctions ended. Please do not  bid if you are not intending to buy. Unpaid dispute will be filed to ebay  for the non payable bidders.

• We will automatically  leave a positive feedback to everyone who has  complete the transaction and leave us positive  feedback.

• Please do not forget  to give us Five Stars on all of the Detailed Seller  Ratings. Thanks!

• In the unlikely event  you are not satisfied with the transaction, please  contact us before you sumbit your evaluation. We  believe that everything could be solved by  communication.
  1.in order to provide you the best  service*****,please treat the transaction  fairly.*feedback is simply what we pursue.
  2.Please Do contact us first to get a better  solution before you would leave a *neutral or  *negative feedback
  3.We strive for 5-star service by stating upfront  our policies, our shipping rate& our shipping  frequency. if you were pleased with this  transaction, please respond with all 5 stars! if you  are not pleased, simply let me know via e-mial  rather than leave low score, and I'll work to make  it that way
  4.Please email me through 'MY MESSAGES' or "Ask  Seller Questions" if you have any question about our  listing or your purchase

•  We are in  Shenzhen of Pearl River Delta which is developed  place with economy and Trade We are a profession  trade company. There are about 16000 kinds of  products in my company,Our products include consumer  electronics, Nail Art Tools, Clothes and shoes, cell  phone accessories, computers  accessories, car accessories, Motorcycle accession,  toys & hobbies, jewelry, baby accessories other useful electronics  items and etc

• If you have any  problems, we are very glad to help you. We rare  handling large volume emails every day. Please allow  us to reply your email within 24hrs

• For the functional  products in our shop (such as: Chargers, Data  cables), which function is the same as description,  but the actual color and shape may looks a little  different from pictures because of the technical  improvement and actual stock state. Please be  advised before you bid. 
                                                                                                                        Copyright(c)2005 wangdecheng9898 All Rights Reserved