Club | Construction | Iron Back | Headcover | Wrench | Interchangeable Shaft | MSRP |
Iron | Cast | Cavity Back | - | - | - | $699.99 |
Hybrid | - | - | Yes | No | No | $699.99 |
All around. The Fly Z-XL Combo Set delivers exceptionaldistance, forgiveness and easy up performance.
An engineered trench behind the face area helps to minimize face thickness, and increase flexion at impact to deliver increased distance through faster ball speeds even on mis-hits.
Long and mid-irons (4–8) feature a dual cavity design with a hollow lower half section that delivers a lower and deeper Center of Gravity meaning you get easy launch with extreme forgiveness in every shot.
Zone Weighting removes weight from the crown to reposition it low and back in the head for a low, deep Center of Gravity. The result? Extreme forgiveness on off center hits and excellent distance no matter where you hit the ball on the face.
Offset Design helps you square the club face more easily at impact. Now you can forget about that slice once and for all, and enjoy finding more fairways and greens in regulation with higher, straighter, more draw-biased ball flight.
The oversized yet traditionally shaped Fly-Z XL Irons are designed to give golfers confidence at address and deliver easy distance through consistently higher trajectories. The dual hollow cavity design allows for a deeper, lower CG which delivers easy up and easy distance. In addition, the hollow construction allows for a thinner face which, along with the Speed Channel, delivers additional ball speed, incredible distance and saves weight. The progressive offset design helps to create easy draw.
Model | Loft (°) | Length (") | Swing Weight | Stock Flex | RH/LH |
3H | 19 | 40.00 | D2, D2, D2 | S, R, Lite | RH/LH |
4H | 22 | 39.50 | D2, D2, D2 | S, R, Lite | RH/LH |
5H | 25 | 39.00 | D2, D2, D2 | S, R, Lite | RH/LH |
6H | 28 | 38.50 | D2, D2, D2 | S, R, Lite | RH/LH |
7H | 31 | 38.00 | D2, D2, D2 | S, R, Lite | RH/LH |
Model | Loft (°) | Lie (°) | Length (Graphite) | Lenth (Steel) | Offset (Steel) | Offset (mm) | Swing Weight (Graphite | Swing Weight (Steel) | Stock Flex (Steel) | RH/LH |
4 Iron | 22 | 59.5 | 39.50 | 39.50 | 6.1 | D2 | D3 | S, R, Lite | S, R | RH/LH |
5 Iron | 25 | 60.5 | 38.75 | 38.75 | 5.6 | D2 | D3 | S, R, Lite | S, R | RH/LH |
6 Iron | 28 | 61.5 | 38.00 | 38.00 | 5.1 | D2 | D3 | S, R, Lite | S, R | RH/LH |
7 Iron | 31.5 | 62 | 37.50 | 37.50 | 4.3 | D2 | D3 | S, R, Lite | S, R | RH/LH |
8 Iron | 35.5 | 62.5 | 37.00 | 37.00 | 3.6 | D2 | D3 | S, R, Lite | S, R | RH/LH |
9 Iron | 40 | 63 | 36.50 | 36.50 | 2.8 | D2 | D3 | S, R, Lite | S, R | RH/LH |
PW | 45 | 63.5 | 36.25 | 36.25 | 2.0 | D2 | D3 | S, R, Lite | S, R | RH/LH |
GW | 50 | 64 | 36.00 | 36.00 | 1.5 | D2 | D3 | S, R, Lite | S, R | RH/LH |
SW | 55 | 64 | 35.75 | 35.75 | 1.5 | D2 | D3 | S, R, Lite | S, R | RH/LH |
Model | Flex | Shaft Graphics Weight | Actual Shaft Weight | Kick Point | Torque | Tip Diameter |
Fly-Z XL Graphite | Stiff | 70g | 67g | Mid | Low | 0.370 |