(5) White Wedge Foam Tiles 21” x 21” x 1-1/2”
(5) White Wedge Foam Tiles 21” x 3” x 1-1/2”
The bidder can upgrade to other sizes (1) 24" x 108" x 1-1/2" (shipping price may be more).
There will be an additional
shipping charge to Canada or any international shipping outside the U.S.
Polyethylene Foam is a closed cell foam that absorbs noise at the medium and high frequency ranges. This foam is very highly rated.
FEATURES: Make you room look amazing. It’s easy, and lightweight so that it can be quickly installed and look good at the same time. With this kit you do not have to cover the whole wall with acoustic tiles. You can group pieces together or separate the pieces, which will soundproof your room.
* Very Flexible / Lightweight * Water proof * Sound damping
* Dense * Excellent buoyancy * Good thermal insulator
* Contains no CFC, or HCFC * Non-toxic
* Impervious to rot and bacteria, mold, & mildew
Thickness |
Mount |
125Hz |
250Hz |
500Hz |
1KHz |
2KHz |
4KHz |
NRC |
1.5” |
Wall |
0.05 |
0.06 |
0.21 |
0.80 |
0.65 |
0.75 |
0.45 |
Sound Silencer / Sound Absorption / Noise Reduction |
Specifications: |
Closed Cell / Ethylene-Ether Foam / Celluplank |
Test Method: |
ASTM |
Density (Lbs./CubicFt.): |
2.3 |
Colors |
White, Blue, Pink, Black |
Compressive Strength-Vertical Direction (psi) |
10.5 |
Compression Set (%) |
18.0 |
Compression Creep |
<5% @ 2.0 psi |
Tensile Strength (psi) |
42 |
Tear Resistance (lb/in) |
13 |
Cell Size (mm) |
1.0 |
Water Absorption (lb/ft2) |
<0.2 |
Bouyancy (Lbs./Cubic Ft.): |
58 |
Thermal Stability |
<5% |
Static Decay |
<2 sec |
Surface Resistivity |
1.0 x 10(10)- 1.0 x 10(12) |
Thermal Conductivity k-Value |
0.40 - 0.48 |
Thermal Resistance R-Value |
2.09 - 2.48 |
Installation Tips
1. If you apply our spray adhesive glue lightly, only on the back of the tiles this will leave a temporary bond.
2. If you apply our adhesive glue to both the mounting surface and the back of the tiles this will leave a permanent bond.
3. For a stronger permanent bond make sure you spray both surfaces and allow adhesive to dry and tacky before bonding.
4. For clean cuts, try an electric knife instead of scissors or a utility knife. (Scissors and utility knives usually leave a jagged edge)
5. Most customers glue tiles with silicone-based caulk. For portability, you could attach Velcro stripes or put double stick tape.