Auction Details |
One Brand New GEOSATpro SL1P SINGLE STANDARD 10750 Ku LNBF for PRIME FOCUS type Dish!
Made specifically for Prime Focus type sat dish, not offset type dish.
60dB Gain, 0.6dB Noise!
The GEOSATpro SL1P Prime Focus LNBF offers outstanding performance
when teamed with a Prime focus dish. Most LNBFs are designed for
mounting on an offset reflector. Offset LNBFs are not optimized for
mounting on a prime focus dish and will not provide reliable signal
reception in fringe signal areas.
We are an Authorized USA Dealer of this product!
KU Linear LNBF IF 11.7 - 12.2 GHz
Designed for Prime Focus Type Satellite Dishes
Low noise figure of .6dB and 60dB gain are combined in this +/-1MHz frequency stable, quality LNBF.
The SL1 P will outperform any other KU LNBF currently available resulting in increased Signal Quality and reliability with your prime focus dish.
What is the difference between a Prime Focus and an Offset design
dish? A prime focus dish has the feed horn centered on reflector and it
is usually supported by 3 or 4 legs or a button hook arm attached to the
center of the reflector. The Prime focus design is not as efficient as
an offset as the feed horn blocks some of the incoming signal and tends
to pick-up more terrestrial noise. The offset design dish is more
efficient and provides better rejection of undesirable terrestrial
noise. This design has the feed horn offset in the lower third of the
dish and it is usually supported by a single support arm from the bottom
of the dish and might also have side support arms.
Note: Standard LNBFs work with all satellite meters and this makes installs easier. Perfect for viewing linear satellites in North America.
See below for full specifications, support, etc...
1 Year Manufacturer Warranty.
Free Lifetime Forum Support
Shipping Information |
I take pride in FAST SHIPPING, most orders are shipped within 24 hours!!
More Information |
We are an Ebay Platinum Level Seller with over 36,000 Positive Feedbacks and over 15 years experience selling on Ebay so you get what you ordered and you get it fast!
GEOSATpro SL1P Specifications:
INPUT FREQUENCY RANGE |
11.7 - 12.2 GHz |
|||
REFLECTOR TYPE |
PRIME FOCUS |
|||
F/D RATIO |
0.5 - 0.7 |
|||
CROSS POL. ISOLATION |
20 dB (Min.) |
|||
NOISE FIGURE |
0.6 dB |
|||
CONVERSION GAIN |
60 dB |
|||
GAIN FLATNESS |
±0.5 dB / 27 MHz |
|||
OUTPUT FREQUENCY |
960 - 1450 MHz |
|||
L.O. FREQUENCY |
10.75GHz |
|||
L.O. PHASE NOISE |
-55 dBc / Hz ( @ 1KHz ) -80 dBc / Hz ( @ 10KHz ) -100 dBc / Hz ( @ 100KHz ) |
|||
OUTPUT POWER LEVEL |
0 dBm |
|||
IMAGE REJECTION |
45 dB (min.) |
|||
OUTPUT VSWR |
2.5 : 1 (MAX.) |
|||
OUTPUT CONNECTOR |
75 Ω F TYPE FEMALE |
|||
DC CURRENT CONSUMPTION |
120 Ma |
|||
OPERATING VOLTAGE |
(1) 11.5 - 14.0 V → VERTICAL POLARIZATION (2) 16.0 - 19.0 V → HORIZONTAL POLARIZATION |
|||
OPERATING TEMPERATURE |
-40deg C - +60deg C |
FREE Lifetime Forum Support:
http://www.legalfreetoair.com
FREE Worldwide Satellite Info Database:
http://www.sathint.com
-Template, layout and text created by Hypermegasat