Hello. Soultone Music Supply is proud to offer this brand new correct reproduction Blackface 2-15" Finger Joined Speaker Enclosure for the classic mid sixties Fender Dual Showman Piggyback Amp Head you see here in the photos. I grew up using these wonderful amplifiers, and have been a fan for over 50 years.

The classic Dual Showman 15" replacement enclosure has been made to exact specifications as the original 1965-1967 model. 3/4" solid #2 pine with 1/4" finger joints at the corners as original. Cabinet grade 1/2" plywood or 1/2" particle board like in the day for the speaker baffle and back panel. (your choice)The center divider panel is also correct and installed. Correct 1/4" x 1" plywood plant-ons and logo shelf for the speaker baffle as original. It even has the 7/8" wide black felt strip installed vertically in the center on the baffle plant- on beneath the speaker cloth as Fender did. All new original style Fender hardware and original hardware placement throughout. Additionally, the yellow insulation batting is installed as original, and the speakers are pre-wired.

 This top of the line in 1967 closed back cabinet measures 24"H x 36"W x 11 1/2"D, and the head and bottom sold for $960. back in the sixties, which is around $6400. in todays dollars.  It was the best you could buy back then!

   Piggyback insert spacing is 25" on center. This will accommodate a Bandmaster or Showman head cabinet with the piggyback hardware installed. This enclosure is as close as one can come to a vintage original. An Original Fender Dual Showman cabinet was taken apart, and every detail was measured and recorded. Built from my Vintage Fender Plan set by myself, this one is done in the Blackface style. New 19" Fender Tilt Back Legs, Fender piggyback bushings, 8- 1" Sphinx glides, 8- 2 screw vintage chrome corners with lip, a flat 2 screw blackface handle, 1/4" speakercraft jack and Fender recessed jack dish in the correct location, correct stainless steel oval head screws for the back panel and speaker baffle......  Fender Black BravuraTolex and Fender Re-Issue Silver Sparkle speaker cloth or Mojo "aged" cloth installed straight and tight on the 2-15" baffle.    Ready for you to install your favorite pair of 15" speakers with it's pre- installed Fender speaker studs and Kep nuts.  No speakers are included with this cabinet.  NOTE: Blonde cosmetics are available for this enclosure at no extra charge.   Note: The head cabinet in the photos is shown for illustration purposes only, and is not included. This listing is for the unloaded bottom cabinet only!

 My price for this outstanding cabinet is $395. , and it is a bargain if you were to add up all the materials and hardware used.  I have done many completed cabinets for Gomez Amplification, for Bob Rissi, whom Leo Fender personally hired in 1961, and for Brian Sances, a local recording artist. No one makes a more authentic replacement cabinet.

    Cabinet will be boxed up with a hard foam surround and shipped via Fed Ex to the U.S. with full coverage.  Too expensive and too large for overseas shipping.

Please understand I Cannot ship the cabinet with the Fender logo installed for legal reasons, but it will be included in the box along with a template for the correct mounting location.

   I am now offering almost any Fender Style Cabinet, either in either  Brownface or Blackface cosmetics. I am not involved in the tweed line. Choose from detailed plans only, flat packed kits, assembled raw cabinets that are ready to cover (RTC), RTC cabinets which come with pre-cut Tolex and all hardware needed, or top of the line fully completed cabinets such as this one.

  I make extension cabinets of any size and configuration, both closed and open back. Any combo type cabinet for any Fender chassis and speaker setup. Custom configurations are no problem.

   As always, thanks for looking and appreciating what I have to offer.