It is completely ready panel for producing energy, only add your connector or solder wire to panel

No glass needed, it is ready solar panel

Solar panel for DIY, for battery charging or connecting to small-large systems

Panel for battery charging or for grid system

it is completely weatherproof, water proof, UV proof

High efficient at overcast without direct sunlight due to silicon cells
(a-Si + a-SiGe)
Minimal power is 92W
Each panel is a light weight panel that weighs little more when 1kg
it doesn't need professional and heavy mounting systems
you can simply fix it through side plastic that is 25mm wide from all sides
Each panel Specification:

Size: 345cm x 48cm x 1.5 mm
Open circuit voltage(Voc): 435V
Optimum power voltage(VMP):319V
Short circuit current(Isc): 0.379A
Max operating current(IMP): 0.288A
torrence:+_5%
Maximum system voltage: 1000V
THERMAL CHARACTERISTICS: (-25 ° C to +90 ° C)
Temperature coefficient Isc +0.08%/ ° C
Temperature coefficient Voc -0.35%/ ° C.
Temperature coefficient Pmax -0.15% / ° C.
Over-current Protection 30mA
weight: 1.6kgs

Technical advantages:

1. Low temperature coefficient: 

Normally, the electricity performance of photovoltaic module is measured by STC standard. 

However, the temperature of solar module, operating in the sun, can be much higher than atmosphere temperature.

With the temperature increase, module power will decrease accordingly. 

Temperature coefficient for thin film silicon solar cell is 0.2%/1celsius, and that of crystalline solar cell is 0.5%/1celsius. 

That means, when the module is worked on 80celsius condition, compare to the efficiency reached on 25celsius test standard , 

thin film silicon solar module will loose around 11% from panel power, and the loss for crystalline will be around 27.5% from panel power at 80celsius

In conclusion, even the STC efficiency of thin film silicon solar cell is low, 

the efficiency in actual operation condition is not far away to that of crystalline solar cell.

2. Good weak light performance: 

The performance of thin film silicon solar cell is better than that of crystalline solar cell in the weak light condition. 

Solar power system with crystalline solar module will not generate power in the late afternoon. 

However, solar power system with thin film silicon solar cell still generates power.

Furthermore, thin film silicon has gentle current-voltage curve. 

This characteristic makes it easier to pick-up the most electricity power

for more quantity or any quastion please contact me viktorsgondars@gmail.com

Each panel is 319V DC 92W 0.288A nominal power

more information on:

http://www.americas.fujielectric.com/sites/default/files/PV%20Module%20Flyer_sm.pdf

Panel have no connectors

connectors are not included

you must solder them yourself 

all postage outside EU I will write small amount for customs, so avoid import tax

In case of import duties and Tax it is buyer responsibility as item will be shipped from Netherlands

All EU countries no extra costs, no customs tax