This
Glock Gen4 Extended magazine release is a made from high strength polymer
material (same as the gun) and fits all small frame and standard frame
generation 4 Glock pistols. It can be installed for right or left hand
operation and extended 0.145” (3.7mm) from the factory magazine release.
The shape of the extension can be modified to fit individual needs.
It is a very simply modification for fast magazine exchange for
competition; shooters with big or small hands.
Features:
1. 0.145" (3.7mm) extended out from the
factory mag release.
2. Made from high strength polymer material
(same as the gun) and would not wear out frame slot of the firearm or factory
magazines.
2. Release button can be installed with the
release button on the left hand or right hand side of the frame (same as the
original mag release).
3. This high strength polymer release button can
be easily modified to fit individual needs by using a file or cutter.
Specification:
1. Fits the following GLOCK GEN4 Glock: 17, 19, 22, 23, 26, 27, 31, 32, 33, 34, 35, 37, 38 & 39 (Does not fit Gen 3 or Gen 4 G20,21)
2. Weight: 0.052 oz (1.46 gm).
3. Additional length over
the factory mag release: 0.106" (2.7 mm).
(Note:
different shooting sports have different limitation on firearms modification;
please consult with the proper authority.)
Warning - before installation
begins.
1. Always wear eye protection if
assembly or disassembly of firearms is required.
2. If you are
not comfortable with the installation procedures described below, please have
the work done by a qualified gunsmith.
3. Make sure
the gun is unloaded before installation begins
Installation:
1. Separate
the slide form the frame as per Glock manual.
2. With the front end of the
frame pointing to you, use your hand to hold down the mag release while using a
screwdriver to pry the "magazine catch spring" out from the groove of
the mag release.
3. Use a long nose pliers to pull out the
"magazine catch Spring"
4. Slide the
mag release out of the frame.
5. Reverse the
steps to install the extended mag release.
Warning: After installation, test fire your pistol in various shooting
position and making sure that your hands would not accidental activate
the extended magazine release. Also holster test the proper function of
the extended magazine release.
1. Shipping and Handling to US and Canada is US$6.50 by Canada Post. Please note that if you want tracking number, you have to pay additional CAD$14.00. (Outside North America CAD$9.00). Shipping time within North America is around 7 to 10 business days.
2. Payment is to paypal account.
3. Add $1.00 for combined S&H of each item won within 5 closing day on the item bearing the highest S&H cost.
All photos posted are copyright protected and permission is required if you want to use them. **