Elinchrom Free Style
Ottime condizioni come nuovo e funzionante al 100%
provato con batteria del ranger rx speed
senza graffi o ammaccatura.
Utilizzato solo in studio.
Come da Foto
Caricabatteria.
Una testata flash free lite s
con coperchio protettivo
Batteria esaurita oppure cambiare i fusibili perche'
e' stato molto tempo fermo e non ricaricato.
Probabilmente serve una nuova batteria.
Cintura trasporto inclusa.
Sincro flah cavo funzionante
Buona Asta
- Resistant to Humidity - Special flashhead connectors, security seals
and caps, "Dry-foot" construction for wet outdoor-conditions.
- Power Stored - efficient 1100 Ws - see chart for flashhead performance!
- Charging -
Fast - 6 seconds to full power for approx. 100 flashes.
Slow - 11 seconds to full power approx. 140 flashes. - Charger - Multi-voltage with set of three adapters.
- Re-Charging Time - To full power - 3 hours.
- The charger can charge a battery in the unit or externally. N.B. New batteries require several cycles to reach full efficiency.
- Charge Ready Beep - Switchable On/Off, with green LED indicator.
- Charge Ready Light/Open Flash - Indicated by two bright LED’s !
- Battery
Charge Indicator - Two green LED’s 100%, one green LED 50%, and one red
LED approx. 10%. The Free Style electronic monitors the low level
charge to maximise battery life.
- Modelling Lamp - Press the
touch once, modelling lamp will switch off automatically after 15
seconds to conserve power. Press twice (within 2 seconds), the modelling
lamp will switch off only after 30 seconds. Maximum modelling lamp
power is 100 W (one flashhead), 50 W (using two). N.B. 100 W modelling
lamp power for 12 seconds equals one full power flash!
- Photo Cell - is adapted to release in bright ambient light.
- Auto Off - To save battery power and maximise flashes, the Free Style will always switch off 5 minutes after the last operation.
- Memory - Retains all last settings even at automatic switch off!
- Power Adjustment with ADF -
5 f-stop power range (68 Ws - 1100 WS) in 1/10 steps with "Auto-Dump-Function". - Synchro Socket - A traditional synch socket, used in all Elinchrom/Prolinca units.
- Battery-Box
Quick Release - Press the pads on the left and right sides of the
housing. Lift the unit to release the battery. Place the unit over the
replacement battery and press down firmly.
- Power Display - Logarithmic, compatible with all other Elinchrom power displays.