|
ARCADE SERVICES / MARKLEVILLE, INDIANA
WHAT SET'S ARCADE SERVICES APART
FROM OTHERS?
EXPERTS IN ALL
ASPECTS OF CUSTOM REPAIR
ARCADE SERVICES HAS BEEN INVOLVED IN THE COIN OPERATED INDUSTRY FOR OVER
35 YEARS!
NOT ONLY WILL YOU GET AN
EXCELLENT PRODUCT YOU WILL ALSO GET EXCELLENT SERVICE AFTER THE SALE
WE SPECIALIZE IN SURFACE MOUNT LOGIC BOARD REPAIR
NOT ONLY DID WE
WORK FOR MIDWAY BUT WE ALSO PROVIDED TECHNICAL SUPPORT FOR TAITO OF
AMERICA
WE ARE A FULL SERVICE REPAIR CENTER AND DO THIS FULL TIME NOT PART
TIME!
GOT QUESTIONS?
WE HAVE ANSWERS!
BUY FROM THE EXPERTS AND GET THE PRODUCTS YOU DESERVE!!!!!!!
WE HAVE BEEN SELLING ON EBAY
SINCE 2001
TIRED OF WAITING DAYS AND
SOMETIMES WEEKS TO RECEIVE YOUR PURCHASES?
SO ARE WE!
CHECK OUT OUR FEEDBACKS ON OUR ULTRA FAST
SHIPPING!
WE HAVE
BEEN SELLING ON EBAY SINCE 2001 !
CHECK OUR FEEDBACKS OUT FOR THE LAST 10 YEARS !!!!!!!!!
WE OFFER AN IRON CLAD WARRANTY ON EACH AND EVERY HARD
DRIVE WE SELL
JUST EMAIL OR CALL US AND WE
WILL TAKE CARE OF ANY AND ALL PROBLEMS RIGHT AWAY
YOU WILL BE PURCHASING A
GOLDEN TEE 2006 UPGRADE KIT
PLEASE NOTE: THIS KIT IS INTENDED TO BE INSTALLED ON A WORKING
GOLDEN TEE OR BUCK HUNTER BOARD AND NOT USED AS A REPAIR TOOL.
THIS KIT WILL UPGRADE ANY GOLDEN TEE 2001 THROUGH 2005 GREEN BOARD.
THIS
KIT WILL ALSO UPGRADE ANY RED GOLDEN TEE 2001 THROUGH 2005 AND ALSO ANY
RED BUCK HUNTER BOARD , CARNIVAL KING IS ALSO INCLUDED AS WELL.
IF YOU ARE FAMILIAR WITH SURFACE MOUNT
SOLDERING THEN YOU SHOULD BE ABLE TO FOLLOW THE INSTRUCTIONS BELOW AND
INSTALL THIS KIT YOURSELF.
FOR THOSE OF YOU WHO LOOK AT THE
DIRECTIONS BELOW AND WOULD RATHER SEND YOUR BOARD IN INSTEAD OF
ATTEMPTING THIS YOURSELF WE CAN INSTALL IT FOR YOU.
COMPONENTS ARE INCLUDED BELOW
PLEASE REFER TO THE SECTION BELOW FOR INSTALLATION INSTRUCTIONS
PICTURES
OF THE GOLDEN TEE BOARDS ARE FOR REFERENCE ONLY AND NOT INCLUDED IN THIS
LISTING
STEP 1 IS TO REMOVE U61 WITH A HOT AIR GUN SO YOU DO NOT
DAMAGE THE PINS
YOU WILL REPLACE THE PROVIDED 8 PIN IC WITH THE DOT IN THE LOWER
LEFT CORNER OF THE IC JUST LIKE THE IMAGE ABOVE
STEP
2 IS TO REPLACE U53 IN THE SOCKET G4C-US-U WITH THE NOTCH POINTING THE
SAME DIRECTION AS THE IMAGE ABOVE YOU CAN USE A SMALL FLAT BLADE SCREW
DRIVER TO PRY THE OLD SECURITY IC OUT. PLEASE NOTE ON THE RED BOARD
BELOW THE NOTCH ON U53 WILL BE POINTING UP AS PICTURED BELOW
STEP
3 IS TO REPLACE U15 THE BOOT EPROM WITH THE NEW EAGLE 2.09 WITH THE
NOTCH POINTING DOWN AS PICTURED ABOVE
FINAL STEP IS TO INSTALL THE COMPACT FLASH CARD AS PICTURED ABOVE
THANKS FOR
LOOKING!
|