Rhinestone Hot Fix Transfer Directions
DO NOT IRON DIRECTLY ON RHINESTONES. YOU MUST USE A TEFLON SHEET, PARCHMENT PAPER OR COTTON PRESSING CLOTH.
DO NOT USE STEAM – DRY IRON OR HEAT PRESS ONLY
Before attempting to apply Hot Fix Transfers to a fabric / product verify labels to ensure that the item can be ironed / have heat applied.WE DO NOT RECOMMEND USING RHINESTONE TRANSFERS ON SEQUIN FABRIC.
Directions:
Begin with an ironed and dry material
Pre Heat Iron / Heat Press: Temperatures vary – suggested is 280 – 325 degrees – Medium setting.
If you are applying the transfer to a multi layer or thin item, it is recommended that you also place a pressing cloth between and or under the item layers to ensure that the glue from the transfer does not pass to multiple layers or your ironing surface.
Carefully peel clear film from transfer backing (Rhinestones will be attached to clear film)
Place transfer as desired
Carefully cover with a Teflon sheet or pressing cloth to ensure transfer does not move. Do not iron directly onto Rhinestone Transfer.
Apply iron or heat press for approximately 10 seconds TO 15 seconds – DO NOT MOVE IRON – Keep the iron in place over the transfer. The clear transfer sheet will not melt.
Wait a few seconds for transfer to cool and gently peel clear film. If any rhinestones are loose – carefully place them as desired and repress.
Hand Washing is recommended for items with Rhinestone Transfers.
The above directions are a suggested method: Please keep in mind that all irons / presses and fabrics vary and heat settings and pressing durations may need adjustment.
The buyer assumes responsibility for all items when applying Hot Fix Transfers