Smart Three Stages Charger(1.0 A) for 12V Lead Acid Battery - UL:

About Smart Three Stages Charger(1.0 A) for 12V Lead Acid Battery - UL:

Describe

  • The Smart charger is designed fast small - compact size 12V Lead acid battery with three stage charging control to promise battery charged fully without damage.
  • Alligator Clips is installed in output terminal with 3.5' cable (red clip is positive)
  • Specifications:
  • Input AC input voltage: 100 to 250 V AC at 47~63 Hz
  • Input Current: Max 0.3A
  • Efficiency: 72%(min)at rating power,115V AC 60Hz
  • Plug: Direct plug in to wall plug without power cord
  • Output Rated: 12V DC @ 1.0Amp
  • 42" length 22AWG wire with one set of clips
  • ACTIVE STATE:(Three stages charging controlled by built in IC) charging
  • The Battery range is between 12V 0.8AH and 10AH
  • Short Circuit Protection
  • Reverse current: less than 5mA at 12VDC
  • Safety and EMI
  • Safely Agency Approvals
  • Emissions Requirements FCC Class B
  • General Features
  • Hold up time 20mS(at 1200V AC,output 30W )
  • Over voltage protection: 115%-130%
  • Short circuit protection
  • Hi-Pt Test: Input to output 1.75KVDC, 3mA, 1 Min
  • Mechanical Requirements
  • Dimensions(L*W*H): 80*52*60mm
  • Weight: 84g
  • Input plug: UL Certificated
  • Environment Requirements
  • Operating Temperature: 0 C to +40 C
  • Storage Temperature: -40 C to +70 C
  • Humidity: 5~95% RH
    •
    ACTIVE STATE 1.Fast Charge 2.Continue Charge 3.Stand-by charge 4.Open State
    Model CC mode CC&CV mode CV mode
    Output current 1.0A max 1.0A or below <0.5A about 0A
    Output voltage <15V 14.8+/-0.15V 13.8+/-0.15V 14.0V Max
    Bicolor LED Orange Orange Green Green

    Size: 80mm x 52mm x 60mm

    Net Weight: 84.00 gs