• 3.6 mm Thick Mesh Watch Bracelet
• Weaved from 1.2 mm thick wire
• Width 18 / 20 / 22 mm
• 2 pcs. removable Solid Extension Links = 2 x 5mm sizing
• Solid Pusher Diver Buckle with 15 mm unfoldable Diver Extension Link
• Fine adjustment at the buckle in 2 steps of 2.5 = 2 x 2.5 mm = 5 mm
• Straight end tubes - fitting any watch
• End tubes inner diameter 1.9 mm - suitable for 1.8 mm thick spring bars
• Finish Glossy Polished or Matt brushed
• Available lengths: 140 / 160 / 180 mm
• Extension Links available
• MADE IN GERMANY - One of the finest and best quality mesh bracelets worldwide!

Polished:

STAIB MESH 3.6 x 22 mm - Pusher Diver Buckle - Matt Brushed - 180 mm - 3.4 oz. = 95 gr. 

Bracelet Lengths: Available lengths: 140 / 160 / 180 mm Length adjustment options: Shorten: 2 steps of 2.5 mm each at the buckle: 2 x 2.5 mm = 5 mm Removing 1-2 removeable extension links = 2 x 5 mm = 10 mm (The 18mm width / 150 mm length version of this bracelet does have even 4 removable extension links) Lengthen: Buckle has has an unfoldable diver extension adding 15mm length if needed (e.g. to wear the watch over a sleeve, diver suit etc.) Additional extension links of 5mm/pc. available seperately Important Note: When a thicker mesh bracelet is bent around a wrist, the mesh will always be pushed together on the inner side and expanded on the outer side. So the inner side gets shorter in comparison to the bracelet length measured when the bracelet is straight, e.g. lying flat on a table. So you will have to + add / - subtract a correction when comparing your wrist circumference with the length of a bracelet measured lying flat on a table. It depends on the thickness of bracelet and type and thickness of buckle. The following table gives you all necessary data for determining the right bracelet length plus watch case length for your wrist circumference. If you have questions, just send us an email.

Bracelet Length      Lying flat	Adjustment range	Correction Flat ≺ ≻ Round	Bracelet circumference bent around your wrist	+ PLUS case length from Pin hole to Pin hole	= Wrist circumference
140 mm	125 - 140 mm ≺ - - - - - ≻ + 15 mm Diver Extension	≻ – 15 mm ≻ ≺ + 15 mm ≺	↻ 110...125 mm	+ 40 mm + 45 mm + 50 mm	= 150 - 165 mm = 155 - 170 mm = 160 - 175 mm
160 mm	145 - 160 mm ≺ - - - - - ≻ + 15 mm Diver Extension	≻ – 15 mm ≻ ≺ + 15 mm ≺	↻ 130...145 mm	+ 40 mm + 45 mm + 50 mm	= 170 - 185 mm = 175 - 190 mm = 180 - 195 mm
180 mm	165 - 180 mm ≺ - - - - - ≻ + 15 mm Diver Extension	≻ – 15 mm ≻ ≺ + 15 mm ≺	↻ 150...165 mm	+ 40 mm + 45 mm + 50 mm	= 190 - 205 mm = 195 - 210 mm = 200 - 215 mm

STAIB Extension Links for further lengthening these bracelets are offered in our ebay-Shop

Other Watches and Watch Accessories you can find in our ebay-Shop