QSC K12 Deluxe Package
Featuring (2 each) QSC K12 Speakers, Ultimate Support TS-100B Air Powered Speaker Stands, MI TEE Extension Cords, & Whirlwind Mic Cables
QSC K12 1000 Watt Powered 12" Speaker/Monitor
- Lightweight portable powered speakers with legendary
QSC amplifier power and reliability
- 1000 watt continuous Class D power modules in all models
- Extensive DSP enhances system performance
- Attractive and professional appearance
- Rugged ABS enclosures
- Tour-grade 18 gauge steel grilles
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
(fullrange models)
The QSC K Series is quite simply The New Standard in lightweight
powered loudspeaker systems. Under the direction of Pat Quilter, QSC's
team of amplifier engineers have created a new standard in Class D
power modules unparalleled in the industry. Next, breaking from the
traditional loudspeaker paradigm, every model is fitted with the
identical 1.75" HF device (fullrange models) and woofers of the same
high quality for unparalleled performance, regardless of speaker size.
Extensive DSP processing is employed throughout, providing levels
of sonic clarity and total output that defy the system's size and
weight.
Premium-grade materials, advanced construction processes and
multiple mounting and suspension options allow for a wide range of live
and installed applications.
Combo XLR and 1/4" TRS inputs accept both Mic and Line Level
input while a set of RCA phono inputs (except KSub) allow additional
connectivity to portable MP3 players, CD players and line-level mixers.
Up to three audio sources can be mixed internally and summed to a
balanced output for "daisy-chaining" of multiple units. Separate direct
outputs are also provided on each channel for additional output
flexibility.
On-board switches provide preset EQ settings. The HF setting
(fullrange models) can be set to VOCAL BOOST for additional presence in
the critical mid-frequency area or FLAT for accurate reproduction of
the incoming signal. The LF switch can be set to NORM, DEEP™ for
additional bass extension, or EXT SUB (fullrange models) for use with
an external subwoofer. The rear panel LED switch can be set to POWER,
illuminating the front-mounted LED when the unit is powered on, OFF for
applications where it is not desirable to illuminate the front LED, or
LIMIT which indicates to the system operator that the clip limiter
circuit has been engaged during operation.
Fullrange models are housed in rugged ABS enclosures with a
professional appearance that is at home in any application. ABS is a
far more robust material than conventional speaker plastics and offers
an additional measure of sonic clarity due to its internal rigidity.
Ergonomic aluminum handles and a highly protective steel grille
complete the package for ease of transport and long term durability.
The K Series fullrange models feature a unique Tilt-Direct™
pole cup mounting system. A simple turn of the dial engages a 7.5
degree downward tilt of the speaker allowing acoustic energy to be kept
on the audience and off reflective surfaces for applications where
maximum coverage from a high-positioned speaker is desired. Integrated
M10 suspension points allow for suspended applications with a K SERIES
M10 KIT (sold separately) or Yoke bracket (sold separately).
- DMT™
(Directivity Matched Transition) provides for matched LF and HF
coverage across the entire listening area, eliminating unnatural "dead"
or "hot" frequency zones.
- Intrinsic Correction™,
first featured in our high-end line-array products maps 65-75
spacially-averaged measurements to IIR and FIR filters that actively
adjust time, frequency and amplitude response to a maximally flat
bandpass target. The result is a speaker that behaves equally well
across the entire sound field.
- DEEP™
and excursion limiting allow for extended low-frequency response by
actively managing low-frequency transients without degradation of the
underlying signal or adjacent frequencies.
- GuardRail™
protection, first introduced on our GX Series amplifiers protects both
the amplifier module and your performance from unnatural and
destructive clipping.
SPECIFICATIONS |
K12 |
Configuration |
Multipurpose 2-way |
Transducers
Low-frequency
High-frequency |
12" cone transducer
1.75" diaphragm compression driver |
Frequency Response (-6 dB) |
52 Hz - 18 kHz |
Frequency Range (-10 dB) |
48 Hz - 20 kHz |
Nominal Coverage (-6 dB) |
75° conical |
Maximum SPL (1 meter) |
131 dB peak |
Amplifiers |
Power Output |
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak |
Input Impedance (ohms) |
XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k |
Controls |
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
Indicators |
Power, Signal A, Signal B, Standby, Limit, Mic |
Connectors |
Balanced
female XLR/¼" line/mic level input, Balanced female XLR/¼" line level
input, Dual Balanced male XLR full range line level out , Balanced male
XLR "mix" out, Stereo RCA line level input, Remote gain control,
Locking IEC power connector |
Cooling |
On demand, 50 mm variable speed fan |
Amplifier Protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
Transducer Protection |
Thermal limiting, excursion limiting |
AC Power Input |
Universal power supply 100 - 240 VAC, 50 - 60 Hz |
AC Power Consumption
(1/8 Power) |
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
Enclosure |
Material |
Impact resistant ABS |
Finish |
Black paint |
Grille |
Black powder coated 18 gauge steel |
Dimensions (HWD) |
23.7" x 14" x 14"
603 mm x 356 mm x 356 mm |
Weight (Net) |
41 lb / 18.6 kg |
Available Accessories |
K12 TOTE, K12 YOKE, K SERIES M10 KIT |
ULTIMATE SUPPORT TS-100B
AIR POWERED SPEAKER STANDS Air-Powered Series speaker stands from Ultimate Support represent
everything all other speaker stands aspire to be. They're incredibly
strong, extraordinarily sturdy, lightweight, 100% field serviceable,
AND raise and lower speaker stands on their own! Driven by innovation
and years of research and development, the Air-Powered Series feature
an internal shock that lifts speakers weighing 50 lbs and less with no
effort, and requires just one hand's worth of effort to raise speakers
weighing more than 50 lbs! Raise and Lower the Speaker with Ease!
The TS-100 is the easiest speaker stand to use thanks to the
internal air-powered shock that literally raises the speaker for you.
The stand's internal shock easily raises speakers weighing 50 lbs and
less with no effort from the user (the Mackie SRM Series, JBL EON
Series, and QSC K Series all weigh far less than 50 lbs, for instance).
And, the TS-100 requires very little effort from the end user to raise
speakers weighing more than 50 lbs. When you're ready to lower the
speaker, we've provided a convenient and ergonomic hand grip from which
you can lower the speaker - with just one hand. There's never been an
easier, more convenient, or safer way to set up and tear down speakers. Check it out in the video below!
The TS-100's offset tripod base design provides more support than
typical "off-the-shelf" speaker stands. The design makes for very tight
internal fittings, doing away with unnecessary sloppy leg problems, and
includes a super strong die-cast metal collar that prevents
over-tightening and breakage issues associated with all plastic designs. The entire stand (legs, mast, and telescoping tube) uses oversized,
heavy-walled aluminum tubing for durability, functionality, and weight
savings. The TS-100 will not rust or corrode (thanks to its
architectural anodized finish), is very smooth to operate, and is
extraordinarily strong yet lightweight.
100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up
to the speaker adapter at the top of the stand, the TS-100 is
serviceable by parts as needed over its very long lifespan. In the
unlikely event that something does break on the TS-100, simply replace
with an affordable part instead of throwing the entire stand away and
buying a whole new one!
- Part Name: TS-100B
- Part Number: 16759
- Height: 3' 8" - 6' 7" (1118 mm - 2007 mm)
- Weight: 12.1 lbs. (5.5 kg)
- Base Diameter: 47" (1194 mm)
- Telescoping Tube Diameter: 1.5" (38 mm)
- Adapter Diameter: 1.375" (35 mm)
- Load Capacity: 150 lbs. (68.2 kg)
- Folded: 43.5" x 5.5" (1105 mm x 140 mm)
MI Tee PC-16/25 Power Cables
16 Gauge, 25 ft - UL Listed, Heavy Duty AC Power Cord
Wattages listed in the chart above are based on 120 volt supply current.
Whirlwind EMC20 Mic Cables The EMC 20 is Whirwind's economy 20' Connect Series imported microphone cable. It features XLR Male to XLR Female soldered connectors in a 20' length.
|