Disponibilité: Article indisponible Livraison: Nous contacter
Garantie: 2 ans pièces & main-d'oeuvre
En Savoir Plus
AUDIO TECHNICA - AT4040SM
Grand diaphragme de technologie avancée, dont la tension a été réglée de telle sorte que le microphone offre un son naturel et régulier
Niveau de bruit exceptionnellement faible, grande dynamique et niveau de pression acoustique admissible élevé pour une plus grande polyvalence
Circuit sans transformateur permettant de n'avoir pratiquement aucune distorsion des basses fréquences et fournissant une excellente réponse transitoire
Protection de la capsule en cuivre nickelé de haute technologie pour une plus grande stabilité et une sensibilité optimale
Sélection de l'électronique montée en surface la plus avancée pour répondre aux normes strictes d'Audio-Technica en matière de fiabilité et de cohérence des produits
Fournie avec la suspension antichoc AT8449
Spécifications
Capsule: Condensateur polarisé (tension de polarisation CC)
Directivité: Cardioïde
Réponse en Fréquence: 20-20 000 Hz
Filtre passe-haut: 80 Hz, 12 dB/octave
Sensibilité: ?32 dB (25,1 mV) réf 1V/Pa
Impédance: 100 ohms
Pression Acoustique Maximale: 145 dB SPL, 1 kHz à 1% T.H.D.; 155 dB SPL avec l`atténuateur 10 dB (nominal)
Dynamique: 133 dB, 1 kHz à SPL max.
Rapport Signal/Bruit: 82 dB, 1 kHz/Pa
Alimentation Fantôme: 48V CC, 4,2 mA typiques
Poids: 360 g (12,7 oz)
Dimensions: Longueur 170,0 mm (6,69"), diamètre maximal du corps 53,4 mm (2,10")
Connecteur de Sortie: Type XLRM 3 broches intégré
Accessoires: AT8449 suspension anti-choc pour pied fileté 5/8"-27; mallette portative de protection
AUDIO TECHNICA - AT4040SM
AT4040SM
369,00 €
Availability: Unavailable product Processing time: Contact us
Guaranty: 2 years by manufacturer
More info
AUDIO TECHNICA - AT4040SM
The AT4040SM side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040SM offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040SM's low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. Supplied with AT8449 shockmount. Also available with the AT8430 stand clamp, AT4040SC.
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
Custom shock mount provides superior isolation
Switchable 80 Hz hi-pass filter and 10 dB pad
Specifications
Element: Externally-polarized (DC bias) condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 133 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.2 mA typical
Weight: 12.7 oz (360 g)
Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case
AUDIO TECHNICA - AT4040SM
AT4040SM
369,00 €
Availability: Unavailable product Processing time: Contact us
Guaranty: 2 years by manufacturer
Más
AUDIO TECHNICA - AT4040SM
The AT4040SM side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040SM offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040SM's low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. Supplied with AT8449 shockmount. Also available with the AT8430 stand clamp, AT4040SC.
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
Custom shock mount provides superior isolation
Switchable 80 Hz hi-pass filter and 10 dB pad
Specifications
Element: Externally-polarized (DC bias) condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 133 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.2 mA typical
Weight: 12.7 oz (360 g)
Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case
AUDIO TECHNICA - AT4040SM
AT4040SM
369,00 €
Availability: Unavailable product Processing time: Contact us
Guaranty: 2 years by manufacturer
Produktinfos
AUDIO TECHNICA - AT4040SM
The AT4040SM side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040SM offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040SM's low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. Supplied with AT8449 shockmount. Also available with the AT8430 stand clamp, AT4040SC.
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
Custom shock mount provides superior isolation
Switchable 80 Hz hi-pass filter and 10 dB pad
Specifications
Element: Externally-polarized (DC bias) condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 133 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.2 mA typical
Weight: 12.7 oz (360 g)
Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case
AUDIO TECHNICA - AT4040SM
AT4040SM
369,00 €
Availability: Unavailable product Processing time: Contact us
Guaranty: 2 years by manufacturer
Dettagli
AUDIO TECHNICA - AT4040SM
The AT4040SM side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040SM offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040SM's low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. Supplied with AT8449 shockmount. Also available with the AT8430 stand clamp, AT4040SC.
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics