The bitterness of low quality is long remembered after the sweetness of low price is forgotten!

You are buying one new 

Missouri Rebel Freedom™ 1700 watts max

9 Blade wind turbine 12 volt 

 This is a high amp model with the new Freedom PMG.

It has a 14 magnet rotor inside and 

our skewed stator core for easy turning and

comes with 1 rectifier shown below.

Stainless steel shaft and No Cogging!

Now hot dipped galvanized for a 50 year finish!

NO PAINTING REQUIRED!

RAPTOR GENERATION 4 BLADES ™

 charge 12 volt battery banks.

Up to 1700 watts max output.

Starts up in just 3 to 4 mph winds

Cut in at 6 mph

Click here for everything you need to know to assemble your Missouri Wind and Solar turbine!





Watch Tore's video on some low wind production

WIND TURBINE, COMES IN 12 VOLT 3 PHASE AC TO DC OUTPUT MODEL

(Can be used as 3 phase output or Dc output for battery charging)

3 phase output is the most efficient, no voltage and amperage loss in long runs

like DC suffers from. DC output requires heavy expensive cable

and has a high power loss over long runs. Straight DC

output is now just simply old technology. If you are replacing a dc output model  you can

just mount the included bridge rectifier at the top of the tower

for the same run of  wire as your DC model if you wish. The bridge rectifier converts the long run of efficient

3 phase into dc next your charge controller, batteries, or grid tie inverter. The 3 phase output can

be used direct to some equipment like 3 phase grid tie inverters as well. Either way you use

it this is a very versatile output wind turbine. 



  

Watch the videos below





    Up to 1600 Watts potential power!
  

  • Freedom PMG (PERMANENT MAGNET GENERATOR) WITH 14 MAGNET ROTOR.
  • one heavy duty bridge rectifier for converting 3 phase to dc output. 
  • Mounting Bracket and Heavy Duty 2 arms tail assembly. Hot dipped Galvanized!
  • Tail fin measures 29" tall for maximum tracking. 
  • No slip rings to fail or replace. Wire tension system.
  • Comes with 9 black nylon carbon fiber composite blades. 
  • Aerodynamically tapered Genuine RAPTOR GENERATION 4 Blades ™ for maximum output.
  • Steel blade hub is 3/16'' thick Zinc Plated
  • Blades Make  61" dia.  
  • Mounting Bracket Fits on 1.5" schedule #40 or #80 pipe.
  • 125,000 hours + of rated bearing life.
  • Freedom PMG has no brushes, Stainless steel rotor shaft, very dependable!  
  • Heavy duty Hub spacer/stabilizer 
  • 5 blade Turbine weighs 49 lbs.  
  • 3 YEAR Limited  WARRANTY. 
  • box size 30" x 10" x 8"
      
HEAVY DUTY MACHINES BUILT TO LAST A LIFE TIME
100 PERCENT MADE IN MISSOURI,
THE SHOW ME STATE!

Missouri Wind and Solar FREEDOM PMG™ (permanent magnet generator)

Our newest innovation in power generation! 

Our Freedom PMG™ permanent magnet generator is specifically 

designed for wind turbine use and can even be used with vertical axis wind turbines (VAWT).  

This permanent magnet generator works best with our 5 ,7 or 9 Raptor Generation 4 blades 

Why buy a Freedom or Freedom II PMG™ over a Delco car alternator PMA?

The answer is simply the Freedom PMG was designed for wind turbine use and more copper!

More copper in the stator core equals more power.  

Each Freedom PMG™ rotor contains twice as much copper than any Delco style PMA.

PMG Features: 

  • Comes with one heavy duty rectifier & one hub spacer stabilizer
  • 17 mm Stainless steel shaft compatible with all Missouri Wind and Solar hubs
  • Polished aluminum case
  • Zinc plated 14 magnet rotor and skewed stater core
  • For charging 12 volt battery banks
  • Specifically designed for wind turbines.
  • MANUFACTURED IN THE USA ONLY BY MISSOURI WIND AND SOLAR!

PMG Specifications:

  • 3/8" diameter bolt holes
  • 1 15/16" on center between mounting holes
  • 5 7/8" OD width
  • 6 5/16" tall



 

 



WE BELIEVE IN THE QUALITY OF OUR RAPTOR GENERATION 4 ™ WIND

TURBINE BLADES SO MUCH WERE NOW GIVING A

LIFETIME WARRANTY AGAINST THEM BREAKING

FOR ANY REASON! (see details below) FREE REPLACEMENT!

The picture below is for illustration purposes only




MANUFACTURED IN THE USA BY

MISSOURI WIND AND SOLAR ONLY ! 


CLICK HERE FOR OUR CHARGE CONTROLLERS!





Come in to the store and meet our sales and shipping team!


A REAL STORE WITH REAL PEOPLE 

YOU CAN ACTUALLY COME IN AND TRY OUR PRODUCTS AND SEE THEM WORKING

WE  ANSWER THE PHONE AND OUR EMAILS

INSIDE OUR STORE MISSOURI WIND AND SOLAR IN SEYMOUR, MISSOURI

 

     

 

We do not mark items as gifts or under report values for customs.

For International buyers, it is strongly recommended to check your own country's

 tax practices as we do not pay your taxes, duty or customs fees.

We do not over charge for shipping; it is simply what the shipping calculator comes up with.

 Customs fees or taxes are not included in shipping, it is your responsibility to pay them.

BLADE WARRANTY

LIMITED LIFETIME WARRANTY


 

LIMITED TERMS FOR ALL RAPTOR GENERATION 4 WIND TURBINE BLADE WARRANTY 
Guaranteed for a lifetime not to break under normal use

Cracked or broken blades will be replaced FOR FREE! 
We only warranty blades if they break under normal use.
Our blades can last 75 years in the Sun (Lifetime)

We do not recommend using our Raptor Blades with any hub made less than the hubs recommended on our site.
Warranty does not apply due to a tower fall, over tightening of bolts
or striking debris from tornado or hurricanes, falling trees.
Warranty only applies when our blades are used with our blade hubs only. Buyer is responsible for shipping costs only.
All broken blades must be returned to Missouri Wind And Solar
for replacement with copy of purchase at owners expense. We will pay to return them back to you.

WIND TURBINE  WARRANTY

3 YEAR LIMITED WARRANTY  DOES NOT COVER ABUSE,NEGLECT  OR DAMAGE DUE TO TORNADOES, HURRICANES OR TOWER FAILURES OR OBJECTS BEING THROWN INTO TURBINE LIKE FLYING DEBRIS, BRANCHES ETC.
DOES NOT COVER RUST AND CORROSION. ALL PARTS ARE COVERED FOR 3 YEARS FROM DATE OF PURCHASE FROM MANUFACTURE DEFECTS, BAD WORKMANSHIP AND FAULTY PARTS. DEFECTIVE PART MUST BE RETURNED AT THE OWNERS EXPENSE TO US WITHIN 3 YEARS FROM DATE OF PURCHASE. ALL CLAIMS MUST BE ACCOMPANIED WITH ORIGINAL INVOICE. ALL INSTALLATIONS MUST BE DONE BY A QUALIFIED INSTALLER. WARRANTY DOES NOT COVER PERFORMANCE.


For ALL UPS orders, we only ship signature required!! Contact us right away if you need to make other arrangements!
Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better.