DETAILED INSTRUCTIONS INCLUDED - NO OTHER PARTS NEEDED - MODULE COMES "FLASHED" FOR YOUR VEHICLE

All you need is a professional installer and about 25 minutes






for 2009 - 2012

Infiniti  FX35 "Push To Start" Models ONLY

Installs Quickly - No Other Parts Needed 

 

Part #: SGD2NIS3

Manufacturer: Directed Electronics (DEI)

*Professional Installation Recommended


Remote Start Ready systems use your vehicles existing remotes.  Your vehicle starts by pressing the factory remote button 3 times.  Rather than taking a chance splicing and dicing the wires of your vehicles electrical system and adding multiple relays, bypass modules, control modules etc etc etc, the RSR system integrates into your vehicle's electrical system and uses your existing components to remote start  your vehicle.  It is a simpler, quicker, less expensive, more reliable means to remotely start your vehicle. Nevertheless, despite it's simplicity, *this system should be installed by someone with a professional level of skill.



For "PUSH-TO-START" Models ONLY (with Smart Key)



WILL NOT WORK if you do not have a PUSH-TO-START Model



OUR KIT INCLUDES "Get In & Go!"

Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start (PTS) equipped vehicle, once it has been remote started.  Typically, users would have to remote start their vehicle, then get inside and press the vehicle start button to perform a takeover.  There is therefore a physical action required to drive away.  With Get In and Go technology, you simply remote start the vehicle, unlock the doors, get in and go...Nothing to do but put the gear in drive and enjoy your vehicle.  This unique feature monitors a variety of parameters such as the key fob, vehicle speed sensor and door sensor, in order to perform takeover securely.


OUR KIT INCLUDES the vehicle specific INFINITI HARNESS as shown.  

Instead of slicing and dicing your vehicles wiring, and spending hours trying to sort out which wire is which, this harness keeps your installation clean and can shave hours off your installation time.  We don't want to mislead you - most installations will require that you hardwire 2 to 4 wires that you will still need to connect individually, which is nowhere near the amount that would be necessary w/o this harness.



 photo THNISS3_zpscpoqry9g.jpg


OUR KIT INCLUDES a custom software FLASH immediately prior to shipment, ensuring that you have the very latest in functionality and performance for your exact model & year

OUR KIT INCLUDES the very latest wire guides, instructions & tech tips for your exact model & year


Simply press your factory remote button 3 Times to remotely start your vehicle!

 



 

 photo THNISS3 composite_zpsa6w44zv1.jpg

 





Save TIME & MONEY on a quality Remote Start system for your Infiniti. Uses your existing remotes. Integrates into your vehicle's electrical system without the need for separate alarm / remote start components. * It does require professional level skill to install, but installs in about 1/4 the time ! 


MAKE SURE YOUR VEHICLE IS A PUSH-TO-START 2009-2012 Infiniti FX35 BEFORE BUYING
Otherwise, DO NOT BUY this item

 



Integrates into factory electrical system & uses your existing 'keyless' remotes. INSTALLS IN ABOUT 1/4 THE TIME!


  • NOT COMPATIBLE w Vehicles w Manual Transmission OR Factory Remote Start System. Check the application guide for your vehicle in the DESCRIPTION section before buying.
  • Quick Install - Nevertheless, *this should be installed by an experienced professional
  • No additional purchase of an immobilizer bypass module is needed.

  • *NOTICE:  We repeat 5  times in this advertisement that this item should be installed by a professional, and preferable a Directed Electronics AUTHORIZED professional.  The installation of this device is simple, quick & clean, but there is always the potential that you may need to consult the manufacturer's technical department for assistance to complete your installation.  Manufacturer's assistance may not be available to non professionals.  Failure to install this item correctly or failure to obtain manufacturer's assistance to complete your installation does not constitute a defect.  Your module was tested in a simulation of your actual vehicle immediately prior to it's shipment to you.  There is a dated, initialed test certificate covering your module which verifies this.  IT IS NOT DEFECTIVE, and this system DEFINITELY DOES WORK AS ADVERTISED IN THE VEHICLES SHOWN IN THIS AD.  Consequently, once you've opened this item, there is a 35% restocking fee if you are unable to complete your installation and you want to return this system for a refund.  Unopened items incur our normal, lower restocking fee.  If you suspect you have a defective item, we will be happy to re-test it at no charge and any true defects, rare as they may be, will be replaced for free.  If you consider yourself an adequately skilled DIY'r, there is about an 85% probability that you will be able to quickly and cleanly install this item like a professional, to your satisfaction.  However, if you fail, it will cost you 35%.  Please consider this before making your purchase


     



    Remote Car Starter,

    Remote Control Car Start,

    Remote Start,

    Directed Electronics (DEI) Makers of Viper, Clifford, Python, Automate & Avital

    NISSAN

    INFINITY


     





    Powered by eBay Turbo Lister
    The free listing tool. List your items fast and easy and manage your active items.