The RC Model Flycolor FlyDragon V2 80A HV ESC Speed Controller for Multicopters is a high performance ESC for big multirotors. It utilizes C8051F310 MCU and pipelined 8-bit C8051 core with 24.5MHz maximum operating frequency. Optimized firmware is specialized for disc motor using ASCF technology (Active Switch Continued Flow), which delivers higher efficiency and significantly reduces the heat when ESC is working. Splash-proof and corrosion resistant, this ESC is especially suitable for agricultural plant protection multirotors. Click and place an order right now!
Features:
1. A high performance ESC for big multirotors
2. C8051F310 MCU, pipelined 8-bit C8051 core with 24.5MHz maximum operating frequency
3. Optimized firmware is specialized for disc motor, excellent compatibility
4. ASCF technology (Active Switch Continued Flow), higher efficiency, significantly reduce the heat when ESC is working
5. Splash-proof and corrosion resistant, especially suitable for agricultural plant protection multirotors
6. Self-adaptable firmware, four timing options, simple to use
7. Support max 500Hz throttle signal, compatible with a variety of flight controls (≥500Hz throttle signal is nonstandard signal)
8. Support maximum 12S LiPo battery, single LiPo battery voltage up to 4.35V
9. Equipped with full protections
10. ESC will cut off output if it fails to start the motor within 3 seconds by accelerating throttle. In this case, you need to move the throttle stick back to the bottom position and restart the
motor (Possible causes: bad connection or disconnection between ESC & motor, propellers are blocked, etc.)
11. ESC will cut off power or output when the load suddenly increases to a very high value. Normal operation will resume after moving the throttle stick to the bottom position
12. ESC will automatically try to restart when ESC and motor are out-of-step. When ESC detects the loss of throttle signal for over 0.32 seconds, it will cut off power or output immediately to avoid an even greater loss caused by continuous high speed rotation of propellers. ESC will resume the corresponding output after the normal signal is restored
Specifications:
1. Current: 80A HV
2. Burst: 120A
3. BEC: OPTO
4. Voltage: 5-12S (18.5-52.2V)
5. Connector Output: 150mm
6. Input: 900mm
7. Suitable for: Quadcopters with Loading 10kg, Hexacopter with Loading15kg, Octocopter for Loading 20kg, and Other Multirotors
8. Dimensions: (3.21 x 1.42 x 0.83)" / (8.15 x 3.6 x 2.1)cm (L x W x H)
9. Weight: 3.63oz / 103g
Package Includes:
1 x FlyDragon 80A V2 HV ESC