Stadler Destiny Evo Gore-Tex Pro Shell Jacke 52 schwarz wasserdicht Motorrad
Beschreibung / Description
Deutsch
Der Stadler Destiny Evo / Faith Evo Anzug ist eine Textil-Jacken- und Hosenkombination mit GoreTex und einem 3-Lagen-Laminat. Die Stadler Destiny Evo Jacke besteht aus 2 Jacken: Einer sommerlichen und luftdurchlässigen Innenjacke und einer wasserdichten Außenjacke.
Modul EVO©
Modul EVO© ist, wie der Name schon sagt eine Weiterentwicklung des modularen Systems. Hier werdem die Vorteile des modularen Aufbaus mit den positiven Eigenschaften von 3-Lagen-Laminaten kombiniert. Die optimale Verbindung von zwei ausgeklügelten Systemen.
- optimale Anpassung an die jeweiligen Wetterverhältnisse aufgrund des modularen Aufbaus
- durch die Verwendung des 3 Lagen-Laminates:
- kein Vollsaugen des Obermaterials bei Regen
- keine Gewichtszunahme
- sehr schnelles Trocknen
Bei Modul EVO© bestehen Jacken bzw. Hosen aus zwei Schichten.
- Die Außenjacke/-Hose besteht aus wasserdichtem, winddichtem und atmungsaktiven 3-Lagen-Laminat und schützt somit vor Wind und Regen.
- Die Innenjacke wird aus stabilen Materialien in Kombination mit extrem luftdurchlassigem Material gefertigt und ist mit Protektoren ausgestattet.
LAMINAT-AUSSENJACKE
MATERIAL
- GORE-TEX Pro 3-Lagen-Laminat (CORDURA®)
FUTTER
- Netzfutter
TASCHEN
- 2 wasserdichte Außentaschen
- 1 wasserdichte Blendentasche
BESONDERHEITEN
- Lüftung unter den Armen bis zur Taille, durch spritzwassergeschützten Reißverschluss regulierbar
- großflächiger Einsatz von 3M Reflexmaterial
- Saugsperre
- Kombiverbindung durch langen Verbindungs-Reißverschluss
- geringes Gewicht
- kleines Packmaß
- Tankschutz
SOMMER-INNENJACKE
MATERIAL
- CORDURA® 500, CORDURA ® Air
FUTTER
- Netzfutter
TASCHEN
- 3 Außentaschen
- 1 Innentasche
- 1 Armtasche
- 1 Rückentasche
STURZPOLSTER
- geprüfte Protektoren an:
- Schulter (EN 1621-1 / S, Typ B)
- Ellbogen (EN 1621-1 / E, Typ B)
- Rücken (EN 1621-2 / B, Level 2)
BESONDERHEITEN
- ausgezeichnete Luftzufuhr an Front, Rücken und Armen durch den großzügigen Einsatz von CORDURA® Air
- Verbindung mit der wasserdichten, winddichten und atmungsaktiven Laminat-Außenjacke über Reißverschlüsse im Frontbereich und über Druckknöpfe im Kragenbereich.
- CORDURA® 500 Doppelung an Schulter und Ellbogen
- Distance Control
- Tankschutz
- Kombiverbindung
MATERIAL
- Außenjacke:
- Außenmaterial: Membrane: 100% PTFE, Cordura: 100% PA
- Netzfutter: 100% PA
- Innenjacke:
- Außenmaterial: Cordura 100% PA
- Netzfutter: 100% PA
English
Modul EVO© is the further development of the Modular System. In this case the advantages of the Modular System will be combined with the positive advantages of the 3-layer-lamniate. This is the optimal combination of two intelligent systems.
- optimal acclimatization to the weather conditions by the Modular System
- by using the 3-layer-laminate:
- the outer material is not soaking with water by rain
- no weight gain
- very fast drying
- The outer-jacket/-pants consists of a waterproof, windproof and breathable 3-Layer-Laminate and protects against wind and rain.
- The inner-jacket/-pants consists of a strong and permeable to air outer material and the protectors.
MATERIAL
- GORE-TEX Pro 3-layer-laminate (CORDURA®)
- net lining
- 2 waterproof outside pockets
- 1 waterproof front flap pocket
- ventilation under the arms down to the waist, regulable by splashproof zip fastener
- extensive use of 3M reflective material
- suction blocker
- combi-connection using long connecting zip
- low weight
- small pack size
- tank protection
MATERIAL
- CORDURA® 500, CORDURA ® Air
- net lining
- 3 outside pockets
- 1 inside pocket
- 1 arm pocket
- 1 back bag
- approved protectors on
- shoulders (EN 1621-1 / S, type B)
- elbows (EN 1621-1 / E, type B)
- back (EN 1621-2 / B, level 2))
- excellent air supply to front, back and arms due to the use of CORDURA® Air
- connection to the waterproof, windproof and breathable laminate outer jacket by means of zip at the front and press-studs in the collar area.
- CORDURA® 500 reinforcement on shoulder and elbow
- distance control
- tank protection
- connector zip
- see Basics
- Outer-jacket:
- Outer material: membrane: 100% PTFE, Cordura: 100% PA
- Mesh layer: 100% PA
- Inner-jacket:
- Outer material: Cordura 100% PA
- Mesh layer: 100% PA
Deutsch
Da unser gesamtes Team seit Jahren selbst aus leidenschaftlichen Motorradfahrern besteht, stehen wir dem Motorradmarkt im Rhein-Main-Gebiet als Fachmann/Fachfrau für alles "rund ums Motorrad und den Fahrer" zur Verfügung.
Im Winter führen wir das Ski- und Snowboardprogramm der Marke Dainese und bieten Ihnen eine große Auswahl an Skijacken, -hosen, Handschuhen und Protektoren
Unser oberstes Gebot sind eine ausführliche Beratung und der bestmögliche Service; auch nach dem Kauf!
Gerne beraten wir Sie persönlich bei uns Laden, per Telefon oder auch gerne per Email.
English
For many years our entire team consists of passionate motorcyclists and we are expert/specialist in the Rhein-Main area for everything "around the motorcycle and the driver".
In the winter seaon we have the ski and snowboard programm of Dainese in stock. We offer you a choice of exclusive ski jackets, pants, gloves and protections.
Our first priority are detailed advice and the best possible service; even after the sale!
We advise you personally at our store, by phone or by email.
Deutsch
Die Anlieferung von DHL Packstationen ist ebenfalls möglich.
Für die detaillierten Versandkosten schauen Sie bitte in der jeweiligen Auktion unter "Versand und Zahlungsmethoden" nach.
English
The delivery to DHL-Packstation within Germany is no problem.
For detailed shipping costs please have a look into the overview "Shipping and Paymentmethod".
Deutsch
(+49) (0) 69 - 77 26 48
ebay@zsf.info
Zubehör-Shop-Frankfurt, C. Schrader KG
Max-Holder-Straße 7, 60437 Frankfurt
English
(+49) (0) 69 - 77 26 48
ebay@zsf.info
Zubehör-Shop-Frankfurt, C. Schrader KG
Max-Holder-Straße 7, 60437 Frankfurt