MILITEC-1 is a clear golden synthetic liquid resembling an SAE 10-weight oil. When MILITEC-1 is added to the primary lubricant of any machine, it willincrease operating efficiency, extend equipment life, reduce downtime and cut unscheduled maintenance.
Even though MILITEC-1 is added to the oil, it is not an oil additive. MILITEC-1 contains no viscosity enhancers or other oil augmentation compounds. It does not modify the primary lubricant in any way.
Instead, MILITEC-1 is a metal conditioner. MILITEC-1 simply uses the circulating oil as a means to reach the critical hot spots and metallic friction surfaces within the machinery. When the oil carries MILITEC-1 to these areas, MILITEC-1 exits the oil, leaving the oil completely unaffected and unchanged.
10 Reasons why you need to use Militec-1
1. Increased Power from the same ammount of fuel
2. Reduction of harmful tailpipe emissions
3. Reduced operating temperatures at all metal friction points
4. Reduced wear, thermal decomposition, corrosion and oxidation
5. 24-Hour lubrication to all metal surfaces
6. Does not affect the viscosity of the primary lubricant
7. Long lasting - Remains bonded to metal surfaces even after several oil changes
8. Less energy required in startups, regardless of weather changes
9. Protects even if primary lubricant is lost, or is contaminated by fuel, antifreeze or combustion byproducts
10. reduced internal material buildup - Contaminants and wear metals cannot cement themselves to protected surfaces
Application Chart |
| All Gasoline and Propane Powered Engines | Add 8 ounces for a 4 to 6 quart/liter engine oil crankcase capacity every 15,000 miles (24,000 KM). Always change oil at the manufacturer’s recommended oil change intervals. |
| Diesel engines | For the first 15,000 miles (24,000 KM) add 2 ounces per quart/liter of engine oil crankcase capacity. Thereafter,add only 1 ounce per quart/liter every 15,000 miles (24,000 KM). Always change oil at the manufacturer’s recommended oil change intervals. |
| Racing engines, older engines or other engines operating in extreme conditions | Add 2 ounces MILITEC-1 per quart/liter engine oil every 7500 miles (12,000 km). |
| Transmissions (Manual or Automatic) | Add 4 ounces every 30,000 miles (48,000 km). |
| Transfer Case | Add 4 ounces every 30,000 miles (48,000 km). |
| Differentials | Add 2 ounces every 30,000 miles (48,000 km) |
| Power Steering | Add 1 ounce every 30,000 miles (48,000 km). |
| Automotive Air Conditioning | Add ½ ounce when charging with refrigerant. |
| Cooling System (Radiator) | Add 1 or 2 ounces to coolant. Aids heat transfer and lubricates water pump. |
| Wheel Bearings | First, coat metal surface with MILITEC-1 before packing.Then pack with MILITEC-1 GREASE or other quality grease blended with 10% to 15% MILITEC-1. |
| Motorcycle Common sumps | Add 1 ounce per each quart/liter of oil in sump. |
| Two-Cycle | Add 2 ounces per each quart/liter of two-cycle oil.
|
