Insert Information | ||||
Manufacturer |
SANDVIK | |||
Insert Code | VNMG 16 04 08-PF | |||
ANSI Code | VNMG 332-PF | |||
Insert Grade | 4215 | |||
Grade ISO Range | P15 (P05-P25) | |||
Insert Material Type | CVD Coated Carbide | |||
Grade Description | CVD coated carbide for finishing to roughing in applications with continuous cut to light intermittence of Steel and Steel castings. A gradient substrate optimized in hardness and toughness with a wear resistant coating. Able to withstand high temperatures without sacrificing edge line security in wet and dry applications. | |||
Geometry Information | PF geometry gives accurate chip flow in axial and radial turning, chamfering and back facing operations. A good finishing type light cutting geometry with low cutting forces suitable for slender shafts, thin-walled and unstably clamped components and where a good surface finish is a priority. | |||
Quantity Supplied | 1 Pack of 10 Inserts. | |||
Condition | The Inserts and Boxes are New/Sealed. | |||
DISCLAIMER | ||||
The technical information provided in this listing is for general guidance only and has been taken from literature provided by manufacturers. Every reasonable care has been taken to ensure this information is accurate and correct and we do not accept any responsibility or liability for errors or omissions or any information that is found to be misleading. For more detailed technical information and to check this information please consult the manufacturers own literature or websites which in general have lots of technical literature available. |
PAYMENT METHODS |
|
POSTAGE/SHIPPING & HANDLING |
All UK parcels are posted using Royal Mail 1st Class Signed For as the minimum delivery method so a signature will be required. INTERNATIONAL |
RETURNS |
Shipping & handling charges are non-refundable. |
FEEDBACK |
|