INFINITY REFERENCE 6530cs 6.5" 17cm COMPONENT SPEAKERS 270w PEAK POWER
PRODUCT DETAILS
165mm two-way component system including Plus One® woofer and 1" textile dome tweeter with I-mount (patent no. 5,859,917) tweeter kit and Starfish™ OEM adapter.
Plus One® woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.
True Four Ohms— All Reference speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Reference Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit.
Edge-driven textile dome tweeters - These are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.
Each Infinity Reference component system includes a pair of laboratory optimized passive crossover netorks that include tweeter adjustment. If the tweeters are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB.
To facilitate proper installation and location of the tweeter, each Reference component system includes Infinity's patented I-Mount™ (patent no. 5,859,917) tweeter mounting kit including the Starfish™ OEM adapter.
Multiple sizes to fit most vehicles.
The Infinity® Reference X speaker series includes a wide variety of configurations to fit most vehicle speaker openings without cutting or modification. It’s the easiest way to maximize the sound performance of your factory system.
High-quality materials and construction.
Advanced materials and construction include treated tweeter domes for less speaker fatigue, smoother response and better performance at the crossover frequency. Speaker motors are oversized for higher sensitivity. Robust construction and inherent weather resistance are evident in the polypropylene woofer cones and rubber surrounds. What’s more, each model is individually “voiced” for broad-spectrum tonal balance and clarity within the critical vocal frequencies – in other words, you’ll hear lyrics that you could never decipher before.
Plus One™ woofer cones.
This innovative design (patent no. 7,548,631 B2) yields up to 30 percent more active cone-radiating surface area compared to conventional speakers. These “over-sized” woofers deliver strong, accurate lows, greater bass output and higher sound pressure levels (SPL).
Edge-driven tweeters.
High-performance edge-driven soft-dome tweeters in the Infinity® Reference X speaker series provide greater clarity with reduced distortion. In addition, they have higher power-handling capabilities and better sound integration with the woofers (all models except 3002cfx).
True 4-ohm architecture.
The Infinity® Reference X series’ low-impedance voice coils make the most of the power they receive from the amplifier, extracting the strongest sound pressure levels (SPL) and the clearest sound from factory systems.
UniPivot™ tweeters.
Sometimes tweeters aren’t positioned in the best locations. This innovative feature lets you “aim” the tweeters for improved stereo imaging (models 6520ix, 5002ix, 9602ix and 8602cfx only).
Adjustable tweeter levels.
You and your passengers aren’t always “on axis” with the tweeters. Adjustable +0 and +3dB settings let you custom-tune higher frequencies, optimizing the sound for different in-vehicle tweeter locations (all except 3002cfx and 6402cfx).
Vented motor assemblies.
Another innovative Infinity® Reference X design feature, vented motor assemblies run cooler for greater durability and longevity. They also decrease mechanical noise by reducing the speed of the airflow in the motor. All of this leads to better bass response at very low frequencies.
Easy installation and a custom-fit look.
The included mounting adapter ring (models 6502ix, 6402cfx and 6500cx) makes installation easy, allowing the same speaker to be used in different factory locations. Component systems include low-profile tweeters that can be flush-mounted, angle-mounted or surface-mounted, giving you greater flexibility during installation. And of course you’ll want to show off your upgrade, so the Infinity logo is silkscreened on the woofer cones of grille-less models, and there are Infinity badges included if you retain the factory speaker grilles.
AUDIO SPECIFICATIONS:
Power Handling, RMS 90 watts
Power Handling, Peak 270 watts
Sensitivity (2.83V @ 1m) 93dB
Frequency Response 58Hz - 21kHz
Impedance 2 ohms
Mounting Depth Speaker: 60mm
Tweeter: 22mm
International buyers, lower value items are sent on Royal Mail first class unless you pay for the signed for service or the item is of a higher price in which the postage details will then only specify the signed for service.
If you have any questions about this
item please contact us by e-mail: info@liquidice2008.co.uk
For Full Terms and Conditions, Including our policy on Delivery and Returns, Please click on this 'About Us' link (Opens new window).