Item Note:
Applications:
* Works For GAS Engine Only.(Not Direct Bolt-On)
T3/T4 Hybrid V-Bend Turbocharger
*T4 Compressor Wheel & T3 Type Turbine flange.
*0.57 compressor wheel trim.
*8 psi internal wastegate
*Capable of producing over 600 horsepower.
*wet float bearings & properly balanced.
*1/8 NPT oil inlet.
*Mapped for low & high boost setups.
*3" inlet diameter with a 2" outlet 0.50 A/R compressor housing.
*0.63 A/R turbine housing,
Front Mount Intercooler
* Bar & Plate Design.
* Brand new universal Intercooler Size: 31.00" (L) X 12.00" (H) X 4. 00"(W) Dual 2.5" Inlet & Outlet front mount intercooler.
*Made of high quality T6061 aluminum.
* Tube and fin design.High flow and light weight.Support up to 400HP and 35PSI.
* Compress air flow rate: 700cubic feet/min.
* Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI.
* Full size: 29.5" (L) x11" (H) x 2.5" (W) 2.5 inch inlet/outlet.
* Core size: 11"(L) X22"(H)X2.75"(W)
Piping Kit
*6061 Billet Aluminum Light Weight Material,
*CNC Machine Mandrel Bent.
*2.5" Tube Pipe.
*Comes with Comes with 12 Pipes, 24 t-bolt clamps, and 8 couplers.
Blow Off Valve
*RS Type Style Blow Off Valve,
*Made Of High Quality Aluminum,
*Hold Up To 800HP Or 25 PSI Of Boost Pressure.
*The Spring Stiffness Adjustment Screw & The Two Different Size Give *The User The Option To Match Vehicle.
*Allow for a Broad operation Range from Low to high boost.
Boost Controller
*Made from CNC machined and Anodized 6061 Aluminum,
*Light weight Design,
*Suited for all turbocharged vehicles running between 1-35 PSI depending on Boost level,
*adjustable knob increases HP and torque
Feed & Return Line
*36" Stainless Steel Oil Feed Line Kit.
*3-way fitting 4AN vs 1/8 NPT to connect engine.
*1/8 NPT Adaptor - male fitting goes with the block.
*1x -4AN Fitting built on flange.
*Extremely durable Stainless steel braided hose.
*CNC machined turbo adapter plate.
*The Retuen Line is 17 inch length & 10 AN fitting
*Made Out of High Quality Aluminum
*Helps circulate oil from the turbo to the oil pan
Package Comes with:
- 2x T3/T4 .63 V-Band turbocharger
- 1x 2.5" 2 in/2out intercooler
- 2x RS style BOV
- 2x Oil Feed Line kit
- 2x Oil Return Line kit
- 1x Boost Gauge
- 2x T3 4 Bolt Flange
- 1x Boost Controller
- 2x 2"-2.5" Size Reducer Coupler
- 12x 2.5" DIY Intercooler Pipes
- 12x 2.5" Silicone Couplers
- 24X T-Bolt Clamps
Notice:
Professional Installation is Required!
This kit might need to custom manifold & exhaust for the complete compatible.
Minor modifications or adjustments will be needed for a perfect fit of this Unit!