 
|
SquareTrade © AP6.0
- Other
- Filter media / resin for tanks
- Combination / Package Deals
- Special Offers
- Replacement filters
- Reverse Osmosis Water Filters
- Whole house Filters
- Aquarium Water Filters
- Water softeners
- Iron, Sulfur filters
- Supplies for water systems
- UV filters
- Chlorinators Chemical Pumps
- Commercial Reverse Osmosis
- Upgrades & Accessories
- Tannin Filters
- Nitrate / Nitrite Filters
- Sulfate Filters
- Fluoride Filters
- Dual tank Alternating Softener
- pH Filter / Acid Neutralizers
- Whole house carbon filters
- Turbidity & Sediment Filters
- Salt Free Water Conditioners
- Fleck Control Valves
- Water Coolers
- Countertop RO
- Water Softener Parts
- Fleck Repair Kits
- Chemicals
- Arsenic Filter Systems
Abundant Flow Water Systems Inc. Specializes in a full line of water treatment solutions. We provide solutions for residential applications, commercial, and hobbiest. Anything from portable systems and filters, accessories and parts all they way to whole house treatment both point of entry and point of use. Reverse osmosis, water softeners, iron filters, UV filters, and special and custom filter systems. We also do light commercial systems.
We believe in providing the quality water you deserve at a price you can afford! Your 100% satisfaction is our number one goal. Abundant Flow Water started in 1998 with a strong belief in upholding Christian values, sharing the love of Jesus, and providing a positive, satisfying customer experience. Member of the Water Quality Association and Better business bureau.
2261 Schoenchen Rd
Pfeifer, KS 67660
Office Hours are Monday - Friday from 8 am to 4 pm central time
Eliminate white scale buildupRemove ironProtect appliancesEliminate spotting on dishesStop rust stainsRegeneration based on water useSingle system/dual purposeDigital Fleck 7000SXT Control14" x 65" resin tank
Riser tube with distributor basket
3 ft3 fine mesh resin
Fleck 7000SXT Digital Metered Control Head
Choice of connection
Larger Round Brine Tank with Safety Float
Flow meter measures water and regenerates based on water use, not time, conserving salt and water
Contains 3 ft.3 of fine resin capable of removing up to 96,000 grains of compensated hardness (hardness factoring in iron and manganese) between regeneration cycles
Specifically designed for treatment of both ferrous (red water) and ferric (clear water) iron, up to a maximum of 8 ppm
Treats a maximum flow rate of 16 gallons per minute
Ion exchange process physically removes the ions that cause hard water
Specially designed resin traps iron and manganense as well as the hardness
Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes
Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing.
Maximum flow and efficiency with simple LCD display and touchpad controls for user friendly control
Durable, high quality polyglass tank made by a trusted name it tank manufacturing
Used for holding salt used during the regeneration process. Measures approximately 18"x33" and holds approximately 300 lbs of salt
Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours.
Hard water causes a multitude of problems. Scale build-up restricts pipes, builds up on fixtures, and can degrade appliances. Hard water spots are also common on dishes and many other surfaces. The ions that comprise hard water attract soap molecules, requiring more soap to get the job done. This also causes an increase in soap scum and can prevent the removal of dirt and bacteria when bathing. Hard water has also been know to cause hair and skin to be brittle and dry.
Iron in your water causes staining issues. The fine mesh resin we use in this system will remove moderate levels of iron from your water leaving you with clean water and eliminate staining.
Water softeners use an ion-exchange process to remove the ions that create hard water, eliminating hard water and the problems associated with it. Automatic regeneration initiated by a high quality Fleck metered head means high efficiency, consistent water treatment, and low maintenance. Soft water will extend the life of your appliances, decrease soap requirements, and decrease the occurrence of soap scum. Softer hair and skin are also common when using water that has been softened.
Controlled by the digital Fleck 7000SXT, high flow, efficiency and control come together in a user friendly interface. On demand regeneration keeps up with high demands and conserves water and salt when demand is low. This results in consistent treatment and higher efficiency. Backed by an outstanding 5-year warranty.
The durable polyglass resin tank is manufactured by Structural USA and is backed by a 10 year warranty. The simple design allows for installation almost anywhere without being unsightly, and optional tank jackets provided added aesthetics for high visible areas. NOTE: Tank color may vary from the one shown
This system comes complete with a brine tank that includes a float assembly for added reliability and peace of mind. Capable of holding up to 250 lb of salt, the large capacity of this brine tank requires infrequent addition of salt and reduces maintenance.NOTE: Color and design may vary from the system pictured
Simple connections and simple set up make this system great for DIYers. Detailed online installation instructions offer a step-by-step guide on proper installation and set up of the system on installation
A. A water softener is a special filter that uses a process called ion-exchange to remove water hardness, also know as CaCO3, from your water. As the water passes through the softener, univalent sodium or potassium ions on the softening resin exchange with divalent calcium and magnesium ions in the water, eliminating water hardness. Eventually the media in the softener (called softening resin) has exchanged all of its sodium or potassium ions, at which point it will no longer be able to remove any more water hardness. This is why the system regenerates. During this process the system runs a brine solution (water and either sodium or potassium chloride) backwards through the softening resin. This concentrated solution forces the trapped calcium and magnesium ions off the resin and down the drain, replacing them with the sodium or potassium ions needed for softening. With the Fleck control heads, this process is automatic, and only as needed!
A. Water hardness is usually measured in grains per gallon (GPG). (Some places use parts per million [ppm] or milligrams per liter [mg/L]. To convert your ppm or mg/L to GPG simply divide by 17.1 [Example - 200 ppm or mg/L is equal to 200 / 17.1 = 11.7 GPG]) The grain capacity of a system is how many grains of hardness your system can remove before it needs regenerated. A 32,000 grain or 32k water softener will remove 32,000 grains of water hardness. From that you can determine how many gallons of water you can go through between regenerations. If you have a 32k softener and your water is 15 GPG hard, you can go through 32,000/15=2,133 gallons of water before your softener is exhausted and needs regenerated.
A. There are 2 main factors in determining the size you need: water usage and water hardness. Here is a general guideline on sizing your system: 32k system - 1-2 people, average water use and low hardness (under 15 GPG) 48k system - 3-5 people with average water use or moderate hardness (15-45 GPG) 64k system - 5-7 people with average water use or high hardness (45-65 GPG) 96k system - maximum efficiency for homes with several people, high water use, and high hardness Service Flow Rate is the maximum amount of water, in gallons per minute (GPM) that a given system can effectively treat. Always size a system based on water usage first, a system undersized for your water usage may not always filter effectively and will wear out faster.
A. Yes, we carry a high quality salt free water conditioner that eliminates hard water problems. Our Scale Sentry system utilizes a specialized media to provide the same benefits a standard softener offers without the use of salt. In addition, beneficial minerals are left in the water and existing scale is removed as well! In our experience our systems outperform other salt free units, including the "magnetic" and electric systems that are widely available.
A. No. The amount of salt put into your water by a water softener is minimal. In fact, in most cases it is low enough that water ran through a softener is still considered "low-sodium" by the FDA. If you want to avoid adding additional sodium to the water all our water softeners can be used with potassium chloride instead of the traditional sodium chloride. If you want to safe drinking water, our drinking water RO systems can turn your ordinary household water into bottled quality drinking water.
A. The Fleck 5600 is your basic mechanical control valve. It does it's job in the most cost effective way possible. It is a metered head so it measures how much water you go through and regenerates based water usage. Due to the mechanical limitations on the head it can only be set to 2,100 gallons, at that point it has to regenerate, so some efficiency can be lost depending on the system size and your water hardness. This head is ideal if you are looking for the lowest cost option. The Fleck 5600SXT works similar to the standard 5600 but uses a digital interface instead of a mechanical one. This makes setup easier, and with the digital control it can be set to go through up to 9,999 gallons of water between regenerations. The 5600SXT can be more efficient that the 5600 because of this, especially in larger homes with lower hardness levels. The other advantage the 5600SXT has is adjustable regeneration cycles, while in most cases these settings won't need to be adjusted, with the 5600SXT the option is there should you ever need it. The Fleck 7000 uses controls similar to the 5600SXT, so it is also in that it is a digital head with backlit LCD display, can be set up to 9,999 gallons, and has adjustable regeneration cycles. The 7000 control is designed as a high flow head, capable of flow rates up to 35 GPM, as compared to the 20 GPM of the 5600 & 5600SXT models, so it offers minimal flow reduction in larger homes. Finally, it is a modular design, simply remove the retaining screw and the head slides apart, making any required maintenance or cleaning a breeze!
A. The only regular maintenance a water softener requires is adding salt to the brine tank, and occasionally cleaning the brine tank.
We accept paypal or any major credit card for payment. Orders will not ship until payment is completed. You can use the links on the listing or your email to complete payment, or if paying by credit card, you will need to call our office M-F from 8-4 central time at 785-735-9769 and give the ebay item number or name of the ebay item you want to pay for.
All orders ship out within 1-2 business days. Orders are carefully packaged and ship fully insured for your protection. Shipping method depends on type and size of order. We mainly ship UPS and USPS. So if you have a different address for a particular shipping type, please let us know. Tracking numbers are sent automatically by the shipping company to your email. Many items have shipping included in the price. Actual shipping charges are not refundable. If you receive a damaged shipment, please inspect carefully, Many times the boxes on heavy objects can be damaged but the contents are just fine. But if you find a damaged item, please let us know right away by email or phone so we can get a replacement out to you.
120 day satisfaction guarantee! Your satisfaction is our number one goal. So we will do what it takes to make sure you are happy with your order. That starts before the sale and lasts as long as you have your water system. Please contact us before the sale if you have questions or just want to talk to a water quality expert to get advice on the best system for your application.
We offer our customers a full 120 day satisfaction guarantee. If for any reason, you are not satisfied and want to return an order, just contact us for return information. Full details are on our website, contact us for more details if needed.
eBay layouts at BiggerBids.com. |
