FairyFix® MIRACLE Pro300 Eyelash Extension Glue Kit For Sensitive Eye Starter
FairyFix® MIRACLE Pro300 Eyelash Extension Glue Kit For Sensitive Eye Starter
All chemical products (including Adhesives, Primer, Remover, Semi-Permanent Mascara and Lash Perm products etc.) listed in TPC Beauty Ltd eBay site (LashArt) are for PROFESSIONAL USE ONLY. Untrained use is not allowed and TPC Beauty Ltd cannot be held responsible. You must be trained, certified and insured adequately to use our Products.
Free LashArt Signature Glue Ring and preserving pack included
FairyFix MIRACLE 3 STEP SYSTEM
FairyFix
MIRACLE 3 STEP SYSTEM is designed to meet the ultimate challenge for
eyelash extension application – fast, safe and comfortable. Developed to
the highest standards in quality, FairyFix MIRACLE Glue was formulated
as a fume-free, flexible and long-lasting adhesive, but was found to be
weaker and cured much slower than strong adhesives. When combined with
FairyFix MIRACLE Cleanser and FairyFix MIRACLE Primer, however, this
revolutionary formula offers remarkable benefits without compromising
comfort or lash longevity, containing no latex or formaldehyde, and
ultimately protecting both you and your client. Available in 2 different
viscosities, to best suit different thickness of lashes:
FairyFix MIRACLE pro200 (medium): 1D Classic Lashes/Sensitive Eyes (lash thickness 0.15-0.20)
FairyFix MIRACLE pro300 (thick): Beginner (student in during training)/Self-Application(must be technician themselves)/Sensitive Eyes (lash thickness 0.25)
Recommended humidity: 55%
Acceptable humidity range: 40% - 70%
Recommended room temperature:25°C - 28°C
Perfect for:
1D CLASSIC Lashes (0.25)
Sensitive Eyes (Patch test required)
Self Application
Starter
Product Specifications:
Size:5g
Colour: black
Viscosity: thick - great for lashes with thickness 0.25
Drying Time (alone): 8/9 seconds
Drying Time (with cleanser and primer): 2/3 seconds
Bonding Time: approx 2 weeks
Fumes & Irritation: low
Shelf Life 6 months, once opened use within 2 weeks
Made in the UK by ISO 9001 certified Chemical Laboratory
Specially formulated to comply with EU cosmetic regulation
Directions:
Clean extensions with extended lash cleanser, leave to dry. Clean client’s natural eyelashes with LashArt Makeup Remover Cloths. Curl client’s natural eyelashes to ideal curl that match the curl of the extension you will use. Apply eyepatch to client’s under eye area to protect lower eyelid and skin. Make sure the client’s eye has been properly closed with no gap. Put primer on client’s natural lashes, and leave until dry.
Remove glue from the foil bag, shake well 60 times, cut the glue lid with the bottle positioned at a 45 degree angle (to prevent the glue from squirting out of the bottle).
Pour one drop of adhesive in a clean container (ideally jade stone + cover sticker). Separate client’s natural lashes to isolate 1 single natural eyelash. Push a single extended lash into the glue and draw the lash out slowly sideways, leaving a thin, even coating of glue on the ? part lower down. Gently stroke the extended lash onto the client’s natural lash, transferring some glue. Place and correct the extended lash to ideal position 1-2mm away from the natural lash root. Repeat with a minimum 5 sec gap until the desired volume has been achieved. Glue may seems already cured, when in fact it is only the surface; it takes at least 6 hours for fast glue to be completely cured and 24 hours for sensitive glue to be completely cured. Allow the primer to completely dry before starting the application, otherwise the glue may cure too fast and cause excessive heat (irritation), leave a white residue on the surface, or the bonding may become too brittle and easy to crack.
Patch Test:
A Patch test is necessary at least 24 hours prior to application. Even this glue is suitable for sensitive eyes there are still 1-2% of people will react to it. The first 24 hours after application is crucial. Clients must avoid using any oil based product in order to maintain optimum appearance and to extend the life of the lashes.
