Rockville RVSPL10.2 10" 1500 Watts Peak/500 Watts RMS Car Subwoofers In A Vented Enclosure Box + 1800 Watts Peak/600 Watt RMS Mono Block Class A/B Amplifier + 8AWG Wire Kit - CEA-Rated Complete Package
Click Thumbnails to Enlarge
Condition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 1 YEAR AUDIOSAVINGS
Authorized Rockville Dealer!
The
Rockville RVSPL10.2A Dual 10“ 1500 watt vented subwoofer enclosure is a
step up from our ever popular RV10.2A which is one of the best bass
all-in-one subwoofer packages that we have ever carried. This bass
package provides more power, which in turn means more bass. The system
includes a newly designed side firing, vertical slot ported enclosure,
which provides more punch and deeper bass. The vent is strategically
located on the right side of the enclosure so that it can corner load in
your vehicle. The slot port runs parallel to the center of the
enclosure where both woofers load and equally share their space. This
custom tuned port provides maximum output by taking advantage of the
acoustic coupling of the woofers location in reference to the port and
provides an equivalent of +3dB boost which is almost like doubling your
amplifier power! You will be amazed at the quality of this bass output.
This
package also includes a new more powerful mono block bass amplifier vs.
most packages that have a 2 channel stereo amplifier. This mono
amplifier is built just for extra loud bass. The amplifier is CEA-2006
compliant so you can be 100% sure you will get the power you expect.
This is one of the only packages on the market that is CEA-2006
compliant. Most brands are unable to do this because they inflate their
power ratings. CEA-2006 compliant means that these are tested and rated
by the same industry standards used by other famous brands like Kenwood,
Sony, Kicker, etc. The subwoofers in this package are of superior
quality. They feature high power 2” high temperature aluminum 4-layer
voice coils with bumped and vented magnet motor structures among other
features.
The distinct advantage of the Rockville Bass Packages are that our
systems from the woofers to the enclosures and amplifiers were all
designed and engineered from scratch to work specifically together as a
system. Tested for months to ensure these met our rigorous quality
standards, the final result is a super efficient bass response with
loud, deep and clean sound.
Features:
- Rockville RVSPL10.2 Dual 10“ 1500w Car Subwoofer+Sub Box+Amp+Wires Bass Package
- (2) Rockville Premium Subwoofer totaling 1500 watts peak power
- Subwoofer Enclosure Engineered With Corner Loaded Tuned Vertical Slot Port for +3dB bass output
- 1500 Watt Mono-Block Amplifier with Subsonic Filter
- Complete 8 AWG Amplifier Wiring Kit
- Dash Mount Bass Remote
- Owners Manual, and 1 Year Warranty Card
Subwoofer and Enclosure Features:
- Rockville RVSPL10.2A Dual 10” Bass Enclosure System with matching Mono Block Amplifier
- 1500 Watts Peak Power / 500 Watts RMS CEA-2031 Rating
- Bonded, Stapled and Braced 3/8“ MDF Cabinet
- Computer Designed, Tuned Vertical Center Loaded Slot Port System
- +3dB increased Bass SPL in vehicle
- Exterior: High quality aviation grade tweed carpet
- Rockville Logo Mark on Carpet
- Mono, gold-plated push style, speaker terminal
- Dual, High-Power, High-Efficiency 10” Subwoofers
- Kevlar Reinforced Ultra Stiff Pulp Cones
- High Excursion Stitched Double Laminated Foam Surrounds
- 3-D Molded Dust Cap
- Linear Progressive Spider System
- 4 Layer, High Power, Aluminum Voice Coil
- Bumped and Vented Magnet Motor Structure
- Frequency Response: 32Hz - 500Hz
- SPL: 100dB @ 1w/1m
- 65oz Magnet Motor Structure Weight per woofer
- Dimension: 25.20" x 13.98" x 16.73"
- Weight: N.W.: 24.25 lbs G.W.: 28.66 lbs
Amplifier Features:
- 1800 Watts Peak Power
- Power Output: 600 Watts RMS CEA-2006 Power @ 4-ohm and <1% Minimum THD
- Signal to Noise Ratio: >97dBA (Reference: 1Watt into 4 ohms)
- Frequency Response: 15Hz - 20KHz (-3dB)
- RMS Power: 800 Watts @ 2 ohms
- 4 Ohm Mono-Block Class A/B
- High Speed MosFET Power Supply with 60 Volt Rail
- BiPolar Audio Transistor Output Section
- RCA Line Input
- RCA Line Output - Full Range
- High Level Speaker Line Input
- OEM Integration Auto-Start Turn On Circuitry
- Dashboard Bass Remote Control with Cable
- Fully Adjustable +/- 12dB Narrow Q Bass Equalizer @ 45Hz
- Fully Adjustable Low Pass Crossover: 50Hz - 250Hz
- Fully Adjustable Subsonic Filter: 10Hz - 50Hz
- Subwoofer ON / Full Range Control Switch
- Damping Factor > 300 @ 100Hz
- Input Gain Control: 150mV - 8 Volt
- Power & Diagnostic LED Indicators
- Computerized IC Control, Thermal, Speaker Short, Overload and DC Protection Circuitry
- Mute & Delay Turn On Circuitry
- Auto Thermal Control Circuitry - At cool down amplifier restarts with no user intervention necessary
Wiring Kit Features:
- 17" High Grade Twisted Pair 100% Copper RCA Cables
- 17' 8 Gauge Translucent Blue Super Flex Power Cable
- 3' 8 Gauge Clear Super Flex Ground Wire
- 17' 18 Gauge Blue Remote Cable
- 17' 16 Gauge Speaker Wire
- Gold Plated ANL Heat Resistant Fuse Holder
- 50 Amp ANL Gold Plated Fuse
- 7' Split Tube Loom
- Accessories: Wire ties, ring terminals, butt connectors, spades and grommet.
About Rockville Quality Control Procedures:
The
Rockville brand stands for Quality, Innovation and Value. All
Rockville products go through the most rigorous quality control
standards in the industry. Products go through months of extensive
testing before they reach your hands. All user functions are tested and
all internal components are tested for quality. Rockville makes products
that are virtually un-breakable! Rockville is one of the only brands in
its class to test every concept model for weeks or months before
starting production. Once production begins, Rockville sends product
engineers to their factory to quality control every line of
production. During production every product is tested and on top of that
Rockville goes the extra mile and has their high level product
engineers do an additional quality control. They test a certain
percentage of all products from the production line a second time to
ensure that the quality meets their vigorous standards, and to make sure
that there is never a batch of products with even a slight problem. All
Rockville products are backed with a hassle free warranty.
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.
Prior to returning merchandise, contact us and we will give you a return authorization #.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:
- We will send you a pre-paid shipping label to replace the item for a brand new one.
- We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
- We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.
Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:
- You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
- You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.