Latest 3rd Generation Revolutionary 5 Axis Breakout Board Professional Version
+ 4 Pieces TB6600HG Stepper Driver DIY CNC Kit
Automatic G-code Recording and Manual G-code Programing Function
|
 |
Descriptions
|
|
The latest 3rd generation breakout board has been upgraded to the intelligent, professional and industrial-level interface board set by re-designing the PCB board, embedding intelligent memory chip (professional version) and upgrading the external manual control tools (control pad and display panel). The re-designing the PCB board will make the breakout board control the microstep drivers more smoothly with lower noise. Actually, the 3rd generation breakout board set has two types of versions, one is the standard version, and another is the professional version. Compare to the standard version, the professional version mainly has two more functions than the standard version, one is the "computer G-code recording function", and another is the "manual programing function". Except these two functions, these two types of versions have no other differences.
|
|
With the embedded intelligent memory chip, the professional version of this 3rd generation 5 Axis breakout board can easily record MAXIMUM 4 Axis' (X, Y, Z, A Axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc..) of the computer, and then rerun the recorded G-code to make the stepper motor work without the computer any more.
|
|
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver.
|
| Click here for the specification of TB6600HG |
|
In short, the qualities and functions of the new 3rd generation advanced 5 axis breakout board are revolutionized from the previous version. With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchuse this kit with confidence.
|
|
The item you are watching is the 5 Axis Professional Version BOB with 4 stepper motor drivers, it is used for 4 axis cnc DIY kit. If you need the Standard version breakout board or need more drivers, please feel free to contact with us.
|
|
Features
|
I. 3G 5 Axis Breakout Board with Display
- High performance, cost-effective.
- To manually control the stepper motor, both of the standard and professional drivers have been equipped with the display panel and control pad.
- Automatically identify both of the computer and control pad, functions of the computer and control pad can be switched intelligently for each other without any interference.
- Display panel can real-time trail the running path of G-Code on the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis'(X, Y, Z A axis etc.) values on its screen, it is completely synchronous with the values’ changing on the FOUR coordinates of Mach3.
- Automatically finish Tool-settings on X, Y, Z Axis via the control pad, without the support of the computer.
|
 |
|
- Both of the standard version and professional version are compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software, etc..
- Two ways to get power, 5V DC power supply or USB port to get power from PC directly.
- Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.
- Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect.
- With Relay output control interface, available to control the spindle motor, air pump, water pump, etc..
- 5-axis work LED display, visually display the working condition of the stepper driver controller.
- 5 Types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool.
|
II. Two unique function of Professional version Breakout Board
|
Automatic G-code recording function
With the embedded intelligent memory chip, this breakout board can easily record MAXIMUM 4 axis' (X,Y,Z,A axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer
Manual G-code programing function
The upgraded built-in manual control tools (display panel and control panel) not only can be used for manual motor control, but also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you also can easily control the microstep drivers and stepper motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc
|
|
 |
III. TB6600HG Stepper Driver Board Controller
- High performance, cost-effective.
- Automatic idle-current reduction.
- Supply voltage up to 45V DC.
- Output current up to 5.0A.
- Suitable for 2-phase and 4-phase motors.
- High speed optoelectronic isolation signal input.
- Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- 1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
- Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually.
|
|
- Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
- Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
|
|
Applications
|
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- Suitable for a wide range of stepping motors, from NEMA 17 to small size Nema 34.
- For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..
- For processing various pattern mould.
|
Power Supply Selection
|
- 12~24V DC power supply for Nema 17 stepper motors.
- 24~36V DC power supply for Nema 23/24 stepper motors.
- 36~45V DC power supply for Nema 34 small size stepper motors.
|
|
Output current of the power supply must exceed the sum of motor rated current.
|
|
Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.
|
|
TB6600HG DIP-Switch Settings
|
I. DIP-Switch Instructions
|
 |
II. DIP-Switch Settings Diagram
|
| Output Current |
SW1 |
SW2 |
SW3 |
| 0.2A |
ON |
ON |
ON |
| 0.6A |
OFF |
ON |
ON |
| 1.2A |
ON |
OFF |
ON |
| 1.8A |
OFF |
OFF |
ON |
| 2.5A |
ON |
ON |
OFF |
| 3.3A |
OFF |
ON |
OFF |
| 4.2A |
ON |
OFF |
OFF |
| 5.0A |
OFF |
OFF |
OFF |
|
| Microstep Mode |
SW4 |
SW5 |
SW6 |
| N/A |
ON |
ON |
ON |
| 1(Full Step) |
OFF |
ON |
ON |
| 2 |
ON |
OFF |
ON |
| 2 |
OFF |
OFF |
ON |
| 4 |
ON |
ON |
OFF |
| 8 |
OFF |
ON |
OFF |
| 16 |
ON |
OFF |
OFF |
| N/A |
OFF |
OFF |
OFF |
|
Interface Instructions
|
 |
|
(3G 5 Axis Breakout Board)
|
.jpg) |
|
(TB6600HG Stepper Driver)
|
Connection Diagrams
|
 |
|
(Breakout-Board-Wiring)
|
.jpg) |
|
(TB6600HG-Wiring)
|
