Up for sale is a heavy duty electronic chute control "DELUXE KIT" with manual switch (style of switch may vary due to availability) and keyfob, for John Deere 47 54 59 and 64 inch snow throwers and will work on Kioti,Kubota and New Holland plus many more tractors as well. Its a great kit for people with limited mechanical ability and don't like wiring. If you can drill 2 holes your pretty much done!! You don't have to even open the hood on your tractor to install it!! The chute control uses a remote key fob (wireless) and a traditional rocker switch to actuate the chute up and down. This means No LARGE HOLES TO DRILL OR CUT IN YOUR DASH! **CAUTION** ANOTHER KIT MAKER EXPECTS YOU TO "HEAT A RAZOR BLADE HELD WITH LOCKING PLIERS USING A BLOW TORCH" TO INSTALL THERE SWITCH. **THIS IS EXTREMELY DANGEROUS**!! Simply mount my control unit using the supplied industrial strength Velcro® or permanently mount your choice. Receiver has a range of over 50 feet. I mounted mine to the top underside of the cab, or you could mount it under the seat etc. Some Ebayers have told me they have installed my kit in as little as 10 minutes! Designed by me a CET and Licensed Electronic Design Tech since 1982. I design Industrial Control Systems for a living and have decided to offer a better designed kit with no compromises. This kit has been tested in the harsh weather environment of Northern Maine the "Home of COLD wet and heavy snow!" This kit is made with the highest quality components available. Please trust my judgement its based on years and years of Experience, Training, and Dedication to the trade.
The motor control unit plugs into the accessory plug on your tractor. The plug also has a indicator light to indicate power on. NO NEED TO RUN WIRES TO YOUR BATTERY! The actuator is HD Rated IP69K along with the control unit. Mounting of the actuator is easy. Simply use the supplied template to mark the holes no measuring!! Then drill (drill bit is included) the holes to mount the actuator. Run the cable (Xtra guard® HD wire) from the actuator to the control box, everything has quick disconnects. Your done its that easy!! Hit the button on the key fob actuator B button moves the chute down. Release the button and the actuator stops. Hit the A button and the chute moves up. Go from full open to full closed in about 3 seconds. Or you can also use the up down rocker button on the control box. As a safety measure if you happen to hit the up button and the down button on the rocker switch at the same time its no problem the CPU sees this as a invalid input and turns of all power to the actuator. You can keep the key fob on your tractor key or hang it off the motor control unit. This will work on any blower system everything is provided to work on larger blowers.
What my actuator system has over the others... no need to open your hood remove your side panels or your grill to run wires through your engine compartment or run to the store to buy anything. Complete "Plug and Play" system all controls are interchangeable. You wont even end up in the Emergency room getting stitches trying to install it!!!! Motor actuator has a rubber cover as a ADDED layer of protection.The actuator is actually HD rated and designed for outdoor low temperature use. It also features internal limit switches AND clutch making it completely protected. Motor control unit has a blown fuse indicator that's easy to access and weather proof (you dont even need to open the hood of your tractor to change it). Automotive grade connectors. All connections are soldered for added strength. Entire system can be mounted and in use in just 1/2 hour or less. No need to cut a hole in your dash for a switch and then have to string wire through your motor compartment. Xtra guard® cold weather heavy duty wire used throughout. Everything has high grade automotive water proof quick disconnects so if you remove your blower or cab for the summer its no problem. This is simply the best and easiest kit out there!!! Everything is supplied, wire ties, mounting hardware, drill bit, instructions, mounting template and more! No one offers you more options on chute actuators than i do! Coming soon Basic, Standard, and Deluxe kits. Basic kit offers traditional switching technology, Standard offers wireless switch technology. And now Deluxe offers both!!! None will require you to cut your dash.
If your tractor doesnt have a accessory outlet i now have a adapter available that hooks to the battery and gives you a accessory plug. Its in my ebay store under "Actuator Systems". Ive included a picture of John Deere's system to show what my system replaces. Extra key fobs are available in my ebay store. Now easy one button programming of extra key fobs! You can program as many as you wish with the new CPU! If you purchase a extra key fob from my store with the purchase of a kit ill program it for you.
Whats included: Low Temp Rated Heavy Duty Actuator IP69K with Rubber Seal
DELUXE Motor Control Unit In a Water tight Box with blown fuse indicator
Key Fob
Motor Extension HD Cable with Locking Disconnects
Mounting Hardware
Nuts for both sides of Chute hand Knobs
Velcro
Cable Ties With Tie Mounts
Spare Fuses
5/16 Drill Bit
Instructions with mounting Templates
KIT BY KIT COMPARISON WITH OTHERS AVAILABLE:
US THEM
Cold weather Rated Actuator with Seal: YES NO
Everything in kit to install system: YES NO
Mounting Hardware ALL STAINLESS YES NO
Automotive grade connectors: YES NO
Mounting included for Larger HD blowers: YES No
Holes needed to be drilled in Dash: NO YES
Blown fuse indicator: YES NO
Returns Accepted: YES NO
Template for mounting on any Blower: YES No
Need to run wire to battery: NO YES
Trouble shooting guide: YES No
Double insulated Wire rated for cold weather: YES No
Connections soldered: YES No
Check my feedback on this item buy with confidence tons of satisfied customers! And as with every item i sell returns are always accepted!
