WGA Equipment (404) 433-5364
 The MTL attachments Extreme DIRECT DRIVE- 72" cut & 80" width Featuring our 3-Blade Double Flywheel
Skid Steer Rotary Brush Cutter
(*** THIS CUTTER MEASURES 80" WIDE X 82" LONG X 28" TALL***)
If your looking for a cutter that is as wide as your tracks are , please make sure you check our measurements
The MTL Attachments Xtreme Cutter is an unbelievable land clearing machine.
Use the MTL Attachments Xtreme Cutter to clear property line, gas lines, and building lots.
The MTL-X is capable of cutting up to 7" diameter trees.
The MTL-X Cutter features a TRUE DIRECT DRIVE motor system, which means there are no belts, chains with gears to break.
Solid steel deck plate with Custom extra heavy duty push bar and open face front.
NEW FOR 2017 Doubled (upper & Lower ) 1/2" plate steel with 3/4" blade sandwiched between the solid steel Flywheel design with integrated balancing
NEW FOR 2017 AR400 solid Steel Blades 3/4" X 6" wide double edged blades / Extreme duty AXE style cutting blades
NEW FOR 2017 - Dynamic Extra Hi-Torque drive motor
Custom welded FLANGE w/ 6 bolt doubled carrier drive unit withstands almost any conditions
Bi-Directional operation - the MTL Extreme cuts in both forward and backward (reversible) - (All units are shipped with the safety 1-way H-Valve in place to prevent accidental reverse damage)
Wide range flow design 16 - 26 gpm (you do not need a high flow machine to operate this unit)
38,000 lb impact rated bearing carrier - supports the most severe conditions imaginable
Universal quick connect system - fitting 99% of all skid steers produced.
Compare to the Bradco Ground Shark @ $9,000 - Blue Diamond @ over $7500
We have available Brand NEW 68" & 80" and now our 84" model MTL Direct Drive units in both Black & Kubota / Bobcat Orange -
We have done Triple Coated Bobcat white and Gloss Takeuchi Red as well, these are build only colors and take 7-10 days to complete
We have these in stock and ready to ship ( please make sure to let us know in the check out section if you would like Orange, default is Black on the cutters)
100% Powder coated assembly - no painted junk
please call 404-433-5364 for additional details or custom ordering options.
68" Extreme 3 blade $3595
80" Extreme 3 blade $3795
80" Extreme 4 blade $4095 - (2-3 day delay in shipping to custom fabricate 4 blade carriers)
84" Extreme 3 blade $3995
84" Extreme 4 blade $4295 - (2-3 day delay in shipping to custom fabricate 4 blade carriers)
Proudly made in the USA
Approx weight - 68" width = 1450lbs / 80" width = 1750lbs / 84" Width = 2000lbs
1 year limited warranty on drive system & any manufacturer Defects
Units are in stock and ready to ship
**************** Shipping Cost is $199 to the lower 48 States to a Commercial Address or YRC terminal******************
SHIPPING:
* To ship at the stated price we will need a commercial building with forklift or loading bay (not a home based business address)
* $199 also includes to your Local YRC freight terminal - you can check your closest terminal at YRC.com
* Please make sure to provide your business name, address, and phone number. These are shipped via commercial freight carrier YRC Freight.
* Residential Delivery is available with an additional charge of $100 , total of $299 for residential delivery.
* Will ship from Our warehouse in Waco, GA 30182
RETURNS
**Return's Must be as New with All Freight Cost the responsibility of the Buyer
Please call or message me if you have any questions or would like to come inspect one of the units
***Common Questions***
What is the advantage / disadvantage to 3 or 4 blades ?
The most common misconception in the industry is the more blades, the better- Not always correct. The single largest problem with any hydraulic cutter is being able to maintain cutting speed / RPM. If you take For Example 3- blades spinning at 750 rpm this is approx 2250 impacts per minute on the blades, this is also 2250 times per minute that there is an attempt to slow the rpm's (revolution per minute) of the cutter - a 4 blade would be 3000 impacts per minute, and 3000 times per minute at an attempt to slow the rpm's. We have found that the 3 blade is the best of both worlds, it offers a very good cut on pasture land grass while maintaining the performance in the larger diameter trees and brush. If your machine is toward the upper limit of the Flow chart, then the 4 blade may be a very good option for you.
Does the unit come with the couplers needed to plug into my machine ? -
Yes the unit is ready to go when it arrives - you will need nothing to start operating the unit.
Does the unit really take down 7" diameter trees? -
Yes, infact our customers once they have got familiar with the cutters & cutting larger diameter trees- they have taken down 10" Pine trees and a few 12" Sweet Gum trees, of course the Oaks and hardwoods are still around 6"-7' max.
What is the advantage of the doubled flywheel carrier ?
If you look on the market you will find there are some similar models offered, and most all of them are single plate carriers, during our testing and development we found the single carriers while cutting overgrowth, and grass work great, but on larger diameter material, they have a greater chance of bending, the double stack flywheel - increases the strength of the design by nearly 3X that of the single stack.