This product is not manufactured by Meade Instruments Corporation. Meade ETX Autostar are registered trade of Meade Instrument Corporation. Seller is not affiliated with Meade Instruments Corporation.Micro Adjustment for Meade 884 deluxe field tripodMeade #884 Deluxe Field Tripod is designed to be use in two positions: Alt/Az position and Polar home position. However, it is not easy to use this tripod in either one of the positions precisely because there is no micro adjust of any kind on this tripod. It is practically impossible to perform a precision Polar alignment with the Meade #884 Deluxe Field Tripod tripod. No precision adjustment, no precsion alignment.
Precision Polar alignment is now possible! Install this Micro Adjustment Kit and you can have precision adjustment in your Meade #884 Deluxe Field Tripod for the Alt/Az and Polar positions. A small screw driver is all you need to install the kit. | |
The Altitude scale is anything but precision on the Meade #884 Deluxe Field Tripod. This only allow very rough, non-precision adjustment of the altitude setting. You have to hold on to the telescope and move the altitude rod up and down to change Latitude. You then tighten it with the lock on the side. This is the altitude lock lever. | |
The Micro Adjustment Modification kit The Micro Adjustment Modification kit, replaces the Latitude Adjustment Rod on the Meade #884 tripod. All you need is to use a screw driver to remove the original Latitude Adjustment Rod and replace it with the Micro Adjustment Rod. The entire upgrade would take less than three minutes. | |
The Micro adjustment kit allow precision leveling of the tripod top platform in the Alt/Az home position. You turn the adjustment nut to raise of lower the platform. | The Micro adjustment kit allow precision altitude adjustment Polar home position. The threaded rod allows precision altitude adjustment. You turn the adjustment nut to change the Latitude of the telescope. |
The Micro Adjustment Kit come with all the hardware needed and instruction. NO drilling required. Only a small straight blade screw drive is need to install the Micro Adjustment Kit. Tripod in pictures are for illustration only and is not include in this sale. |
Terms and Conditions.Please asked question if you have any doubt. | |
Payment:
|