Haas 29-10081 40 HP Vector Drive (Reparaturpauschale)
Ihr Gerät wird generalüberholt! Folgende Arbeiten werden an diesem Antriebsmodul durchgeführt:
- Tausch von verbrauchten und defekten Teilen wie z.B. Kondensatoren, Transistormodulen, ICs, Wiederständen.
- Überholung und Prüfung aller Stufen z.B. Ansteuerung der Treiberendstufe, Ansteuerung von Transistormodulen, Kommunikationsstufen sowie Netzmodulen.
- Das Antriebsmodul wird am Motortestsystem mit originalem Motor über längere Zeit getestet.
- Gründliche Reinigung, bei Bedarf wird der alte Lack entfernt und neu lackiert.
Auf Grund der qualitativ hochwertigen Arbeiten geben wir 12 Monate Garantie auf einwandfreie Funktion.
Folgende Fehler sind uns beispielsweise bekannt und können beseitigt werden:
Fehler |
Ursache |
Keine Funktion, keine LED-Anzeige |
Netzmodul, Ansteuerung des Netzmoduls, Internes Kurzschluss |
Motor ruckelt |
Ansteuerung der Treiberendstufen, Transistormodule ausgefallen |
Funktion erst nach Erwärmung |
internes Netzteil, Systemsteuerungsboard |
Keine Kommunikation mit der CNC |
Systemsteuerungsboard |
Im Grunde kann jeder mögliche Fehler in unserer Testanlage erkannt und beseitigt werden.
Haas 29-10081 40 HP Vector Drive (Repair Fix Price)
Your unit will be completely overhauled. The following work will be performed on this drive module:
- Replacement of worn and defective parts such as capacitors, transistor modules, ICs and resistors.
- Overhaul and testing of all levels e.g. driver amplifier control, transistor module control, communication levels and network modules.
- The drive module will be tested on the engine test system with an original engine for a prolonged period of time.
- Thorough cleaning: where required, the old paint will be removed and the relevant surface will be repainted.
The high quality work enables us to provide 12 months warranty for proper functioning.
We know about the following faults, for example, and can remedy them:
Fault |
Cause |
No function or LED display |
Power supply module, power supply module control, internal short circuit |
The engine stutters |
Driver amplifier control, transistor modules failed |
Only functions after warming up |
Internal power supply unit, system control board |
No communication with the CNC |
System control board |
In principle, any possible faults can be detected and remedied in our test system.