Properties / Applications
MEM insulating paint LMF is a black water-repellent cover spread
latex-bitumen-based. It is a protective coating for concrete surfaces and masonry in
contact with the soil as a seal against rising damp.

OPERATION
MEM insulating paint LMF dries to a seamless, water-repellent,
foil-like coating. The coating does not become brittle and is resistant
against naturally occurring concrete aggressive substances.

Underground u. Processing
MEM insulating paint LMF dries to a seamless, water-repellent,
foil-like coating. The coating does not become brittle and is resistant
against naturally occurring concrete aggressive substances.
The substrate must be sound, clean, strong, largely flat and free of cracks,
Be gravel nests etc. and residues from oil, grease, dust or other interfaces.
The substrate may be slightly moist without visible film. The treated
Surfaces must not be permanently wet, as can be no drying.
MEM insulating paint LMF stir well before use. On absorbent
Substrates is a preview engraving from MEM insulating paint LMF and water (1:1)
apply. After drying, MEM insulating paint LMF with roller,
Brush or suitable spray equipment in 2 to 3 layers applied, each layer
before further processing by must be dried.
In areas at risk of cracking a reinforcing fabric should be incorporated into the 2nd layer.
Avoid direct sunlight during processing. Rain during
processing or drying may result in damage (eg rinse).
Before filling the coating must be suitable protection, drainage or
Insulation boards are protected (point or line loads to avoid).

Consumption
about 200-250 ml / m⊃2; per layer

Processing temperature
5 ° C - 35 ° C (air and component, during the drying)

Material composition
Solvent-free deck spread on latex-bitumen-based

Specifications
Form: liquid
Color: black
Odour: weak characteristic
Ph: approx. 9-10
Density: 1,05 g / cm⊃3;
EU limit value for this product (cat A / i.): 140g / l (2007) / 140 g / l (2010). This product contains max. 1g / l VOC.

Cleaning
Any potential contaminants may with commercially available
Cleaning agents be removed. Rinse tools with plenty of water.

Safety information
The risk and safety recommendations on the units and in the
Safety data sheets must be observed.
Handle in accordance with good industrial hygiene and safety practice.

Warehousing
MEM insulating paint LMF must be dry and free of frost stored unprocessed
Material in the original container is kept tightly closed.
If sealed in original packaging and with proper storage MEM
Insulating paint LMF at least 12 months.

Packaging
1 bucket A   10 liters

See Instructions