Dual-channel USB Digital Storage Oscilloscope 50MSa/s 10MHz LCD Portable T9Z5
It can not only work in ordinary Y/T mode, but also work in Y/X mode where it can graph relationships of any two signals. It is also an USB oscilloscope. It can be placed in "Persistent Display" mode that keeps waveforms on screen until you erase them. This is very useful when combined with NORMAL trigger mode to capture and compare multiple waveforms that meet certain trig condition. The trigger sensitivity is adjustable. This enhances the stability of capturing noisy signals. It is very easy and straightforward to use. No annoying command navigation.
Features:
10MHz analog bandwidth and 50MSa/s real-time sampling rate on each channel.
Vertical sensitivity 10mV/Div to 2V/Div (1X probe) and 0.1V/Div to 20V/Div (10X probe).
Record length 500-8000 points on each channel adjustable.
Trigger position adjustable and trig point indicated.
Trigger sensitivity 0.2div-4div adjustable.
Save/Recall up to 4 captures.
Screen image hardcopy via USB.
Firmware upgradable via USB.
Battery/USB powered.
Specifications:
Vertical:
Number of Channel: 2
Analog Bandwidth: 0-10MHz
Sensitivity: 10mV/Div-2V/Div
Resolution: 8bit
Input Impedance: 1M ohm 20pF
Maximum Input Voltage: 50Vpk(for 1X probe) and 400Vpk(for 10X probe)
Coupling: DC/AC/GND
Horizontal:
Max Real-time Sampling Rate: 50MSa/s
Timebase: 0.2us/Div-10min/Div
Record Length: 500-8000 Points (each channel) Changeable
Run/Hold Modes: One Button Switchable
Trigger:
Trigger Modes: Auto/Normal/Single
Trigger Slope: Rising/Falling Edge
Trigger Sources: Ch 1 or Ch 2
Trigger Sensitivity: 0.2div-4div Adjustable
Trigger Position: 0%-100% of Capture Buffer Adjustable
Trig Point Indicator: Yes
Other Features:
Y/T Mode and Y/X Mode selectable
Save/Recall up to 4 captures
Screen image hardcopy
USB connection for data transfer and firmware upgrade
Rotary encoder for quick parameter setting
Display:
2-inch 128 * 64 LCD
Backlight ON/OFF Control
Contrast Adjustable
Power Supply: 3.7V Li-ion battery / USB
Current Consumption: 300mA @ 3.7V (with LCD backlight ON)
Physical:
Dimension: 140 * 70 * 30mm / 5.5 * 2.75 * 1.18in
Weight: 160g / 5.66oz
Package Size: 17 * 15 * 5cm / 6.7 * 5.9 * 1.97in
Package Weight: 350g / 12.37oz
Package List:E0684
1 * Oscilloscope (Built-in Battery)
2 * BNC Probe
1 * USB Cable
1 * User Manual (English)
Features:
10MHz analog bandwidth and 50MSa/s real-time sampling rate on each channel.
Vertical sensitivity 10mV/Div to 2V/Div (1X probe) and 0.1V/Div to 20V/Div (10X probe).
Record length 500-8000 points on each channel adjustable.
Trigger position adjustable and trig point indicated.
Trigger sensitivity 0.2div-4div adjustable.
Save/Recall up to 4 captures.
Screen image hardcopy via USB.
Firmware upgradable via USB.
Battery/USB powered.
Specifications:
Vertical:
Number of Channel: 2
Analog Bandwidth: 0-10MHz
Sensitivity: 10mV/Div-2V/Div
Resolution: 8bit
Input Impedance: 1M ohm 20pF
Maximum Input Voltage: 50Vpk(for 1X probe) and 400Vpk(for 10X probe)
Coupling: DC/AC/GND
Horizontal:
Max Real-time Sampling Rate: 50MSa/s
Timebase: 0.2us/Div-10min/Div
Record Length: 500-8000 Points (each channel) Changeable
Run/Hold Modes: One Button Switchable
Trigger:
Trigger Modes: Auto/Normal/Single
Trigger Slope: Rising/Falling Edge
Trigger Sources: Ch 1 or Ch 2
Trigger Sensitivity: 0.2div-4div Adjustable
Trigger Position: 0%-100% of Capture Buffer Adjustable
Trig Point Indicator: Yes
Other Features:
Y/T Mode and Y/X Mode selectable
Save/Recall up to 4 captures
Screen image hardcopy
USB connection for data transfer and firmware upgrade
Rotary encoder for quick parameter setting
Display:
2-inch 128 * 64 LCD
Backlight ON/OFF Control
Contrast Adjustable
Power Supply: 3.7V Li-ion battery / USB
Current Consumption: 300mA @ 3.7V (with LCD backlight ON)
Physical:
Dimension: 140 * 70 * 30mm / 5.5 * 2.75 * 1.18in
Weight: 160g / 5.66oz
Package Size: 17 * 15 * 5cm / 6.7 * 5.9 * 1.97in
Package Weight: 350g / 12.37oz
Package List:E0684
1 * Oscilloscope (Built-in Battery)
2 * BNC Probe
1 * USB Cable
1 * User Manual (English)
