Main function:
1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
2). The Soldering station, Hot air rework‘s temperature are using Intelligent Fuzzy logic PID control, therefore the temperature steady-state drift is relatively small, it overcomes the drift quite quickly even in a harsh environment.
3). Fan's airflow capacity, Soldering Iron and Hot air rework's temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
4). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
5). Hot air rework, soldering iron are equipped by variety of fault protection
6). Power supply part of the recovery with continuous protection protection, to avoid various unexpected burning mobile the phenomenon of interference.
7). The DC power supply provides power to a mobile phone
8). Product is simple in design, therefore it can operate without too many keys involved.
Feature:
1.Three digital LED displays, one Analog meter.
2.Power hot air Gun (740W) and holder.
3.Hot Iron and Holder with sponge.
4.Each function has its own switches, can work independently or together
5.Controlled by Dual-Core microcomputer for fast temperature rising and keeping stable.
6.Large Multiple LED Displays
7.Adjust the airflow and temperature control rotation easily
8.The air gun automatically enters standby when the temperature is less than 70oC threshold.
9.Soldering iron with anti-static design to prevent electrostatic damage on dedicated SMA components.
10.Intelligence cool airflow features long service life of the machine and safe personal operation
11.ESD design of soldering iron to protect sensitive components
12.DC power supply has recovery function with continuous protection
13.The Power supply is used not only for service power supply on mobile phone repair, also can measure and test DC voltage
14.High-quality resistance for durable use
15.Plastic stand for keeping the iron from flammable materials
16.Fits for soldering and desoldering SOIC, CHIP, QFP, PLCC, BGA or other temperature-sensitive components
17.Full intelligence self-detection functions on air gun and iron to provide safe operation mode
18.Sensor on handle leads to operating mode (high temp) when picked up or to standby mode (low temp) when laid down
19.Suitable for heating shrink, drying, lacquer removal, viscidity removal, ice-out, pre-heating and glue soldering
20.Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun.
21.With short circuit, open circuit, over-temp and over-load protection.
22.Fits for heating shrink, drying, lacquer removal, viscosity removal, ice-out, pre-heating and glue soldering.
Voltage: 110/220V ,50/60Hz AC (CE Approved)
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Total Power: 700W+50W+15W=765W±10%(max)
Work environment : 0-50°C
Iron parts |
Gun parts |
Dc power supply parts |
Work Voltage :AC:26V±10% 50HZ |
Work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
Work Voltage:AC 20V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:700W±10% |
Output power:15W/30W/45W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V Output current:1A/2A/3A |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Recovery time:<100us | |
Tip of ground voltage<2mV |
Ripple dB<1mvrms (virtual value) | |
Temperature coefficient:<300PPm/°C | ||
Protection starting current:>standard value 10% |
Package Includes:
1 x Rework Station
1 x Hot Air Gun
1 x Iron Stand
1 x Soldering Iron
1 x 11 Soldering Iron Heads
1 x CP-2015F Solder Wick
1 x 2 bags of Accessories
1 x Sponge Pad
1 x Manual