Please NOTE: This listing is for B-Stock item. It means that this unit was refurbished by manufacturer and holds full manufacturer warranty, however it may have scratches, signs of wear and tear or come not in original box. The Atlona AT-HDVS-200-TX is a 3×1 switcher with display control for HDMI and VGA transmission over Ethernet-enabled HDBaseT™. It features two HDMI inputs and a VGA input with 3.5mm audio connector. The AT-HDVS-200-TX combines the benefits of a switcher with built-in auto-switching and the advantages of extended-distance HDBaseT signal transmission over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200, and control signals can be extended up to 328 feet (100 meters). The switcher enables automatic display on/off, auto-switching, third-party control, plus other control features. The switcher receives power from the AT-HDVS-200-RX scaler via Power over Ethernet and together they create a standalone AV switching system with scaling for classrooms and huddle rooms. HDVS-200 series devices are also useful as components in larger systems utilizing switchers such as the AT-UHD-CLSO-824 matrix switcher where they are used as input/output modules. Button pushes are transmitted via IP to any IP based control system or IP controllable device. When used with the AT-HDVS-200-RX, IP commands are converted to RS-232 or CEC commands for use with most displays. HDVS-200 Series The HDVS-200 Series is a simple audio visual system with auto-switching for HDMI and VGA inputs, projector on/off control, analog audio de-embedding, volume control, and a scaler. It is a premium upgrade to the HDVS-150 Series offering functions that enable IP management, and other advanced installation functions including multiple RS-232 ports, a contact closure port for screen control, CEC display control for consumer displays and Ethernet-enabled (100 m) HDBaseT performance. The HDVS-200 Series incorporates many integrator-requested features while still maintaining overall value. The AT-HDVS-200-TX is ideal for: - Complete System Applications – Used with the AT-HDVS-200-RX, the switcher accommodates one or two HDMI sources plus a VGA source in classrooms, huddle rooms, and small conference rooms. The switcher can be installed under a desk/table/lectern. In these applications, the pair offers input auto-switching, HDBaseT transmission, and control functions. With audio de-embedding, it is easy to connect to a small amplifier and speakers for better audio.
- Large System Applications – The AT-HDVS-200-TX works well as a remote input device for the AT-UHD-CLSO-824 matrix switcher. The buttons can be used for control of inputs or show me functions. In addition, the AT-HDVS-200-TX offers the capability to route 4K/UHD @ 60Hz signals to the matrix switcher.
Features 3×1 HDBaseT™ switcher - Features two HDMI inputs plus a VGA input with 3.5mm audio connector
- Allows advanced HDMI display devices to be used with legacy VGA sources
Ethernet enabled, HDBaseT extension - Transmits IP and HDMI signals up to 328 ft. (100m) @ 1080p and 328 ft. (100m) @ 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Auto-switching - Selects active input when sources are connected or if there is a change in source power status
- Eliminates need for complex control system in small AV systems
TCP/IP and RS-232 control - Flexible control options for compatibility with 3rd-party control systems. RS-232 controlled from HDBaseT connection
- Reduces integration time and costs
Front panel Input Select button - Overrides auto-switching when two active sources are present
- Simple manual control allows presenter to maintain control of AV system
Auto display control - Automatically changes projector power state based on active or standby mode of scaler. Control signals transmitted via IP, RS-232, or CEC
- Eliminates need for complex control system in small AV systems. Enables display and volume control with AT-UHD-CLSO-824. CEC enables control of low-cost consumer displays
Front panel Display On/Off control - Remotely controls display power state; provides alternate ‘Display Mute’ mode
- Eliminates need for manual operation of display or use of IR remote control
Front panel volume control - Remotely controls audio volume; provides ‘Mute’ mode
- Eliminates need for manual operation of display or use of IR remote control
Specifications: | Resolution | | Video | 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i | | VESA | 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 | | Color Space | YUV, RGB | | Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0* | | Color Depth | 8-bit, 10-bit, 12-bit | | Audio | | Analog IN | PCM 2Ch | | HDMI IN & HDBaseT OUT | PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio | | Sample Rate | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz | | Bit Rate | up to 24-bit | | Distance | | CAT5e/6 @ 4K | up to 70 meters | up to 230 feet | | CAT5e/6 @ 1080p | up to 100 meters | up to 328 feet | | CAT6a/7 @ 4K | up to 100 meters | up to 328 feet | | Signal | | Bandwidth | 10.2 Gbps | | CEC | Yes | | HDCP | 1.4 | | Temperature | | Operating | 0°C to 50°C | 32°F to 122°F | | Storage | -20°C to 60°C | -4°F to 140°F | | Humidity | 20 to 90% non-condensing | | Dimension | | H x W x D | 38 x 127 x 102 (mm) | 1.5 x 5 x 4.02 (inch) | | Weight | | Unit | TBD kg | TBD lbs | | Certification | | Unit | CE, FCC | Package Includes: AT-HDVS-TX-WP-NB - 3-In Extender (Tx)/Switcher for HDMI/VGA In w Ethernet HDBaseT Output |
Low Cost 
