Gelid Icy Vision Rev.2 VGA Cooler for High-end AMD and Nvidia

Buy now for £42.51

The ICY VISION includes five power heatpipes with 10 effective heat transmission channels and 85 individual 0.4mm thick high quality aluminium fins. This configuration ensures a faster heat dissipation from the GPU to aluminium fins. And thanks to the two 92mm S-shape fans that provide 20% additional air flow than traditional fans, the ICY VISION cools High End Graphics cards at a lower noise level than the original stock cooler. Both fans are wired together and are powered by a single 3-pin fan connector which connects to any free 3-pin fan header on the motherboard and they do run at full speed so if you prefer to have some control over the Icy Vision's fan speeds, we would recommend that you use a Gelid Fan Controller or other fan controller, which will allow you to set your preferred cooling/noise balance. Compatibility The Icy Vision boasts a massive compatibility list. Straight out of the box it is suitable for the following... AMD - HD4850, HD4870, HD4890, HD5830, HD5850, HD5870, HD6850, HD6870, HD6950, HD6970, HD7850, HD7870, R9 270X, R9 290X NVIDIA - 9800GT, 9800GTX, GTS250, GTX260, 275, 280, 285, GTS450, GTX460, GTX465, GTX470, GTX480, GTX560 TI, GTX570, GTX580, GTX680, GTX770, GTX780 The heatsinks required for cooling the RAM and FETs on the graphics card are all included. Please note the following height restriction drawing to aid compatibility with your system. The Icy Vision will take up three spaces when installed in your case, so if you only have two PCI-E slots that are placed really close together the you probably won’t be able to run a dual card configuration with the Icy vision installed. PLEASE NOTE It is important that you check with your card's manufacturer prior to fitting the cooler that your card adheres to the reference designs issued by AMD / NVidia otherwise the cooler may not fit. If you are not sure then the best way to check is to mount the cooler in place without using either the thermal paste or any of the supplied heatsinks. Once you are happy that the cooler fits it is then safe to remove the cooler and install it correctly according to the supplied instructions. Only fit the cooler once you are 100% sure it will fit as once the thermal paste and heatsinks have been used the item becomes non-returnable. Should you find the card does not fit and you haven’t used any of the heatsinks or the thermal paste then the card can be returned for a refund.