Description
This is an aftermarket steering wheel hub boss adaptor kit + quick release
kit combo for:
87-90 Nissan Pulsar NX
This hub boss kit is made of high quality light weight aluminum with rubber, and
it is 67.6 mm/2.66 in tall with approximate 3.5" diameter. This hub boss kit
comes with 6 holes pattern that is compatible with most aftermarket racing
steering wheels (such as Momo, Nardi, etc), and it is a necessary part if you want to install the aftermarket racing
steering wheel. The steering wheel hub package comes with 1 x hub boss
kit, 6 screws and 1 wrench for installation.
This combo package also comes with a ball bearing lock quick release hub kit. The purpose of quick
release kit is to allow you to detach the aftermarket steering wheel
easily by just clicking the quick release button. This quick release
kit is made of light weighted aluminum, and it is 33 mm/1.3 in tall and
approximate 3.5" diameter. This quick release kit also comes with 6 screws and
a wrench for installation. Installation is not included, professional
installation is highly recommended.
General installation steps (additional steps might be needed depend on
different applications, but here is the basic steps you will need to do):
Step 1: Preparation
Before you remove the stock steering wheel, open your hood and disconnect the
negative terminal of your battery, this is to prevent your horn from going off
while working on the steering wheel or blowing the horn fuse.
Step 2: Removal of the Horn
Stick your flat head screw driver into the slit of the horn button and pry it
out carefully. It should pop out with ease. Disconnect the wire
connections for the horn and place the horn button aside. (If you car has
air bag, additional steps might be needed, and you should seek help with
professional to install the steering wheel)
Step 3: Unbolting the steering wheel:
After taking out the horn, it should look like the photo above, unscrew all
the screws and then use your 19mm socket attached to the breaker bar to unbolt
the steering nut in the middle. Be careful as it is fairly tight and be careful
not to smash your windscreen with the breaker bar. Once the nut is off, pull on
the steering wheel and rock the steering wheel left to right and up and down to
loosen it, it will be very tight, this might take some force.
Step 4: Attaching the hub boss kit and aftermarket
steering wheel:
Now you will need to do this step carefully as you want the steering wheel to be
straight, if your off by a hole, your steering wheel be to one side while your
driving straight, and you'll have to realign the wheel again. Place the boss
onto the column and pull the horn wires out as you don't want them stuck inside
the boss kit when you install the horn. Align the steering wheel to the boss kit
by rotating the boss kit till the steering wheel is in the right direction. Then
use your hex key and secure the steering wheel in place.
Step 5: Wiring up the horn:
Connect the 2 little wires from the boss kit and the steering wheel to the horn,
it doesn't matter which wires go where on the horn button, it just needs to
complete a circuit when you push down on the horn. Now once that's done drop the
horn button into place. Making sure the metal parts on the button don't touch
any other metal surface because the horn will then always be honking and you'll
have to redo this part.
Demonstration of quick release kit function:
Payment Detail
- We accept Paypal payment with confirmed address ONLY
- We also accept Visa, Mastercard, Discovery and American Express credit cards if you do not have a Paypal account
- All California shipments are required to pay CA sales
tax of 9%.
- All items sold requires immediate payment.
- We do offer combined shipping discount for
international orders, please email us for detail.
Please make sure you put the correct address in English at eBay checkout. We will
not see the notes you left at checkout, so please contact us for any changes via
eBay message.
Refunds will be given as credits to your Paypal account or as debits to your credit card. Buyers are
responsible for transferring the credits from Paypal to their Bank/Credit Card accounts.
Return Policy
If you want to return the item, no problem, we will take it back and issue
full refund to you. See more detail:
30 Days Money Back
Your satisfaction is very important. If you are not satisfied with the
products for any reason, please contact us for a RMA# and we will refund the
ITEM PRICE of any unused items upon receiving the items back. The items must
be in their original condition and no signs of being installed or used, and
free of scratches. Shipping and Handling are not refundable.
60 Days Limited Warranty
Our products come with 60 days limited warranty against manufacturer’s
defects. No exchange will be allowed for products that have been damaged
during installation. Please contact us for a RMA# before sending the item
back for exchange. If your item is damaged during shipping, please refer to
DOA Section. All warranty claims MUST have a RMA number issued by
Modifystreet.
DOA
If you have received a damaged or broken item, please email us immediately
with a picture of the broken item attached so we can help you file a damage
claim with the shipping carrier. No claims will be honored after 30 days
after item is received.
- All products must be in original packaging with RMA
number issued by Modifystreet written on the outside of the box. Packages
received without a valid RMA number will be rejected and no credits will be
issued.
- Please allow 24 to 48 hours to receive your RMA
number. Please allow 10-14 Days to process your return or exchange after it
is received by our RMA department.
NOTE: We cannot send out replacements without receiving the items back. We
strongly recommend you to keep your original parts in case you need to
exchange your purchase. This way you'll have something to use while you wait
for your replacement.
- Our products DO NOT come with installation
instructions. Professional installation is highly recommended. Customers can also contact us for installation advice.