Key Features

Radios

Dual Radios • 802.11a/n (5 GHz) and 802.11b/g/n (2.4 GHz) concurrent operation

Internal Antenna • Optimized for 802.11n spatial diversity

• Optimized gain pattern for maximum radio coverage

• True omni-directional antenna allows position-independent placement

Radio Transmit Power Setting • Granular Transmit Power Settings in single dBm increments

• Configurable power allows control of RF cell size

Reliability

RF Auto-Tuning • Self-tuning for optimal channel, data rate and transmit power

• Eliminates coverage holes if adjacent APs go out of service

• Hardware ready for Spectrum Management functions

Scalability

Clients • Supports up to 500 simultaneous clients

Encryption • Dedicated hardware-based line-rate encryption for certified operation of WPA (TKIP), WPA2, (AES), 40-bit WEP, 128-bit WEP, and Dynamic

 WEP with per session rotating keys

802.11n

• 2 x 2 MIMO (2 Radio Transmit and 2 Radio Receive chains) with two spatial streams

• 20 MHz and 40 MHz channels

• PHY data rates up to 300 Mbps per radio.

• Adaptive Frame Aggregation L2 (MPDU-Aggregation) and L3 (MSDU Aggregation)

• Maximal Ratio Combining

• Cyclic Delay Diversity (CDD)

• Weak Signal Detection

• Maximal Ratio Combining

• Range Extension

Security

Physical Security • Highly inconspicuous design, looks like a smoke detector

• No data or security credentials stored locally

• No console port; no local access is possible

• If stolen, no secure configuration data goes with it

• Stolen AP can be “blacklisted”

• Integrated Kensington security lock feature

WIDS/WIPS • Either radio can be configured independently for ActiveScan or SentryScan

Installation

Mounting • One snap invisible ceiling grid attachment

• Supports ceiling-mounted and wall-mounted deployment

Powering • Any Trapeze Networks Mobility Exchange WLAN Controller with PoE

• Any PoE-enabled switch or mid-span injector

RF Planning • Outage resiliency planning for RF Auto-Tuning using RingMaster®

Specifications

Hardware Specifications

Dimensions • Diameter: 7.1 inches (18 cm)

• Height: 2.4 inches (6.1 cm)

• Weight: 569 g (1.25 lb)

Interfaces • One RJ-45 port for 10/100/1000 Mbps Ethernet and Standard IEEE 802.3af Powerover-Ethernet (PoE)

Environmental • Operating temp: 0ºC to 50ºC (32ºF to 104ºF)

• Storage temp: -40ºC to 70ºC (-4ºF to 158ºF)

• Humidity: 10% - 95% (non-condensing)

Status Indicators • 3 dual color LEDs indicate activity and various states

Power Consumption • Max: 11.3W with both radios at peak transmit power over maximum length Cat 5e

• Min: under 9W idle over maximum length Cat 5e

802.11n Radio Specifications

Operating Frequency • 2.4 GHz to 2.472 GHz and 5.15 GHz to 5.85 GHz

Modulation • Orthogonal Frequency Division Multiplexing (OFDM)

Transmit Power • Based on regulatory domain, up to maximum of 21dBm in 2.4/5GHz with 2 antennas

Configurable Association Rates • Modulation Coding Scheme MCS 0 – MCS 15 (6.5Mbps – 300Mbps) Legacy Rates: 54 Mbps, 48 Mbps,

 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, Mbps and 6 Mbps with automatic rate fallback

802.11a Radio Specifications

Operating Frequency • 5.15 GHz to 5.85 GHz

Modulation • Orthogonal Frequency Division Multiplexing (OFDM)

Transmit Power • Based on regulatory domain, maximum of 21dBm in 2.4/5GHz with 2 antennas

Configurable Association Rates • 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps and 6 Mbps with automatic fallback

802.11b Radio Specifications

Operating Frequency • 2.4 GHz to 2.472 GHz

Modulation • Direct-Sequence-Spread-Spectrum (DSSS)

Transmit Power • Based on regulatory domain, maximum of 21dBm in 2.4/5GHz with 2 antennas

Configurable Association Rates • 11 Mbps, 5.5 Mbps, 2 Mbps, and 1 Mbps with automatic fallback

802.11g Radio Specifications

Operating Frequency • 2.4 GHz to 2.484 GHz

Modulation • Orthogonal Frequency Division Multiplexing (OFDM)

Transmit Power • Based on regulatory domain, maximum of 21dBm in 2.4/5GHz with 2 antennas

Configurable Association Rates • 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps and 6 Mbps with automatic fallback

Radio Approvals

Operating Channels • Based on regulatory domain

5GHz Radio Approvals • USA: 47CFR (FCC) Part 15.407 and 15.247

• Canada: IC RSS-210, Issue 7

• Japan: TELEC per the W52/W53/W56 requirements

2.4GHz Radio Approvals • USA: 47CFR (FCC) Part 15.247

• Canada: IC RSS-210, Issue 7

• EU: ETSI EN300 328, EN301 489-1 and 489-17

• Japan: TELEC

Standards Compliance

IEEE • 802.3i: 10BASE-T Ethernet

• 802.3u: 100BASE-TX Fast Ethernet

• 802.3ab: 1000 BASE-TX Gigabit Ethernet

• 802.3af: Power over Ethernet

• 802.3at: Power over Ethernet

• 802.11 a/b/g/n, 802.11d, 802.11e, 802.11h, 802.11i, 802.11k

• 802.1X Network Access Control and Mutual Authentication

• 802.11a, 802.11b, 802.11g and 802.11n Wireless LAN

• 802.11e quality of service (QoS) (WMM), call admission control (TSPEC), Unscheduled Automatic Power Save Delivery (U-APSD)

• 802.11i Fast Roaming (PMK Cache), encryption (AES/CCMP and TKIP)

• Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access 2 (WPA2)

• Wi-Fi Multimedia (WMM) & Wi-Fi Multimedia Power Save (WMM-PS)

IETF • IETF CAPWAP WG Taxonomy and Architecture compatibility

Regulatory Compliance

Safety • UL 60950-1, 2nd Edition

• UL 2043 (MP-522E only)

• CAN/CSA No. 60950-1-07

• CB Scheme to IEC 60950-1 2nd Edition

• EU Low Voltage Directive 2006/95/EC

Environmental • WEEE: EU Directive 2002/96/EC

• ROHS: EU Directive 2002/95/EC, 2006/122/EC

Other • EU EMC: Directive 2004/108/EC

• EU Medical: EN 60601-1-2 (2007)

• FCC Part 15, Class B

                 • IECS-003, Class B

EU DFS-3 • EN 301 893 v1.5.1

Ordering Information

Ordering Information

MP-522 • AP with dual radios: 802.11a/n and 802.11b/g/n, auto-negotiating 10/100/1000 Ethernet port, 4 internal 2 X 2 MIMO internal antennas