Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset. For TB6560AHQ Datasheet, Please click here.
1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step.
Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors.
Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment.
On board current switching - Power output can be set according to specific user requirement.
Full closed-type optical isolation to protect the user's computer and equipment.
Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!).
4 channel inputs interface- Can be used for XYZ limit and emergency stop.
Professional design - Two stage signal processing with super anti-jamming.
Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect.
Four-input Control; Allow setting the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment.
Universal architecture - Supports most parallel software MACH3,KCAM4 etc.
For compatibility with other softwares, please feel free to contact us.
Current Setting
|
1 | 2 |
Decay Mode Settings
|
3 | 4 |
MicroStep Settings
|
5 | 6 |
100%
|
ON | ON |
FAST
|
ON | ON |
1
|
ON | ON |
75%
|
ON | OFF |
25%
|
ON | OFF |
1/2
|
ON | OFF |
50%
|
OFF | ON |
50%
|
OFF | ON |
1/8
|
OFF | ON |
25%
|
OFF | OFF |
SLOW
|
OFF | OFF |
1/16
|
OFF | OFF |
Power supply DC 12-36V
1) The stepper motor directly gets the power from the stepper driver, it doesn't require a separate power source.
2) Voltage Selection:
12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
24-36V DC power supply for Nema 34 stepper motors
(High voltage will burn up the chips or stepper motors!!!)
3) Ampertage Selection:
Output current of the power supply can be calculated by the following expressions:
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good. If you are not sure about the selection of power supply, please feel free to contact us for help.)
The power output of 12V shall be applied to the radiator fan of 12V .
Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Suitable for unipolar or bipolar stepper motors.
Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.
Note: Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.
These external tools on the left and bottom of the following picture are only for exhibition.
We don't have them for sale at the moment.
If you need other models, Please feel free to contact us.
Electrical properties (ambient temperature Tj = 25 °C pm) | |
Input Power
|
12-36V DC power supply |
Stepper motor drive current | 1.5A - 3A/phase |
Drive type | Double-pole constant flow PWM actuation output |
Compatible Stepper motors | 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max |
1 x 3 Axis TB6560 Driver Controller
3 x Nema 23 57BYGH56-401A Stepper Motor
1 x 24V 10A DC power supply
1 x white ribbon 5-pin limited cable
1 x DB25 parallel cable
Estimated Delivery Time(Subject to Stock Availability) | |||
USA (excl. Alaska, Hawaii, Puerto Rico) | USPS First-Class Package/UPS SurePost/UPS Ground | 3-7 business days | |
Other Countries (May depart from other stock location) | International Airmail Service | 12-21 business days |