Mustang Billet Headlight Knob Instructions

1. Pull the headlight knob all the way out in the "ON" position.
2. Locate the small tab on the side of the headlight knob. 
3. Use a flat screwdriver to push the tab to remove factory headlight knob.
4. Once the factory headlight knob has been removed.
5. Take the UPR Billet Headlight Knob and slide it over the shaft.
6. With the shaft pulled out to the "ON" position. 
7. Take supplied Allen Wrench and Set Screw. 
8. Install the set screw and tighten it until the knob is tightened on the shaft.
9. Now you can enjoy your New UPR Billet Headlight Knob Installation.