eBay
www

100% brand new 7.0 Inch TFT LCD module with Font IC (w/touchscreen and SD slot) (also for Arduino MEGA or DUE)



Description:

This 7.0" TFT LCD Module can be can be easy controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems which require display high quality colorful image. The Module used SSD1963 LCD controller with 7 inch LCD module with touchscreen. This LCD has a superior display quality and super wide viewing angle, please see the sample pictures, they are taken directly from the LCD display.

 

For Arduino/chipKit usage, they are compatible with Arduino MEGA 2560 and Arduino DUE, with the CTE Mega and DUE shield available in our stores.
To use the module on Arduino DUE, please use THIS shield, 
To use the module on Arduino MEGA 2560 , please use THIS shield,
To use the module on chipKit Max32, please use THIS shield, 
To use the module on chipKit Uno32 uC32, please use THIS shield,

The TFT LCD Module has embedded Font IC, which contain fonts of 10 sizes and 236 icons.
With this LCD module, you will be able to draw bigger and nicer fonts, and also extended ASCII characters too.

Starting from 1April, this TFT will be shipped with Font IC, which support the new UTFT_GHL library. The new UTFT_GHL library is the next version of UTFT_CTE library which provide a lot of new and exciting features based on the fontIC. For UTFT_GHL library details, please visit http://www.utftghl.com/

1. Convenience and simple Windows program to add image to the fontIC with just two steps directly to the TFT, no SD card is required.
    Upload “Flash_Multifunction” Sketch to your Arduino Select the image using the exclusive Win_FontICManager and upload. The software will automatically find the next available sector on the FontIC and return the “index number” of the image. You can then use this “index number” to load the image in your own arudino sketch:
CTE_LCD.Load_image((“index number”);
CTE_LCD.Load_image(x, y, (“index number”);
CTE_LCD.Load_image(x, y, (“index number”, angle, centreofx, centreofy);



2. Support adding of new fonts.
    Beside the traditional Bitstream Vera fonts which is bundled together at shipping, you can now add other type of fonts and different sizes to your fontIC with just one click. Upload “Flash_Multifunction” Sketch to your Arduino Select the .bin font file using the exclusive Win_FontICManager and upload. The software will automatically find the next available sector on the FontIC and return the “index number” of the font. You can then use this “index number” to load the font in your own arudino sketch:
CTE_LCD.Put_Text("This is your text", 5, 226, (“index number”)

3. Advanced Font/image Presentation:
    The following advanced features are supported using the new UTFT_GHL library:
    • Fonts/Images can be used in LANDSCAPE or PORTRAIT mode.  
    • Fonts/Images can be drawn with or without transparent background. 
    • Fonts/Images can be drawn rotated. o Fonts can be drawn LEFT, CENTER, or RIGHT justified. 
    • Images can be drawn centred in both axes. 
    • Width of text strings can be ‘measured’ allowing accurate placement of text.

4. Support Win_FontICManager2 software
    The version 2 of Win_FontICManager software can allow you to dump the fontIC contents (both images and fonts) to the windows folder with just one click, so that you can view the current images/fonts inside your fontIC at any given moment, you can also put all the images into a folder and upload them directly to the fontIC in a fast way.

Beside this TFT, we have other TFTs for your select and they support UTFT and UTFT_GHL libraries too: 

Module Name CTE TFTs: UTFT supported UTFT_GHL supported
CTE32HR 3.2 (480x320) YES Pending
CTE32_R2 3.2 (320x240) YES YES
CTE32W 3.2 (400x240) YES YES
CTE35IPS 3.5 (480x320) YES YES
CTE40 4.0 (480x320) YES Pending
CTE43 4.3 SSD1963 YES YES
CPLD 4.3 CPLD YES YES
CTE50 5" SSD1963 YES YES
CPLD 5 CPLD YES YES
CTE70 7" SSD1963 YES YES
CPLD 7 CPLD YES YES

If you have purchased this TFT before and want to upgrade your fontIC to support UTFT_GHL, you can upgrade on this link

*Note: UTFT_GHL is licensed by Graham Lawrence, the purchase price of this TFT include the license of UTFT_GHL library and Win_FontICManager. The usage of UTFT_GHL and Win_FontICManager on non-Coldtears Electronics TFTs is prohibited and not supported.

Package List:
1. 7.0" TFT LCD Module w/Font IC
(Shipped in retail box with registered airmail with tracking number)
2. Screen Protector for free if the LCD is bought together with Arduino CTE Shield for DUE or MEGA2560)

Download:

     Download for Icons and fonts information, Pin definition, LCD/IC datasheet, PCB schematic and Initialization code
     


`  
Henning Karlsen's UTFT library: http://www.rinkydinkelectronics.com/library.php?id=51
    Click HERE to download the UTFT_GHL libraries instruction manual
    Click HERE to download the UTFT_GHL libraries and utiliites.
Features:

  • 7.0" TFT LCD Module,  Resolution 800x480, SSD1963 Controller
  • On board 64Mbit SPI Flash for storing fonts of 10 sizes and 236 icons for custom application development
  • Write images/icons to flash memory via SD card with zero programming
  • 64Mbit can store 1800 42x42 pixel icons/images
  • LCD Type: TFT Transmissive Normal White 
  • Interface: 8/16bit parallel bus interface 
  • PCB Color: Blue
  • On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight
  • LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace
  • Module dimension: 186mmx106mmx23mm(including pin header extrusion)
  • Active Area: 154mmx86mm
  • Pixel pitch: 0.179mmx0.179mm
  • Standard 2x20 2.54mm pin header for connection to MCU/development board
  • Module weight: 410grams

About us:

We specialized in providing TFT LCD modules embedded systems for fun and creativity. TFT LCD models are tested and selected for sale for greatest quality and lowest price. Models-specific initialization code is provided to save your time in optimizing power control and gamma values for your TFT LCD.


Shipping:

  • Shipping Service:  All items will be sent from Hong Kong by HK Post directly to destination, no time-wasting routing through different countries.
  • Economy Int'l Shipping (This is the default shipping method, unless specified): This shipping use normal airmail post and is not trackable
  • Standard Int'l Shipping (For an additional charge of USD$2.5) This shipping use registered airmail post and is trackable in Hongkong Post and Post Website of some countries. Items will be sent to you as a registered packet.
  • Express Int'l Shipping : This shipping use HK Speed post, DHL, Fedex or UPS. Usually they takes 4-7 workdays. If you need your items to be shipped in this way, please contact us and we will change the shipping charges.
  • Item will ship to your Paypal Confirmed Address, so please make sure your shipping address is correct before you buy item.
  • Buyer need ship to other address (not Paypal confirmed address) should contact us before buying the item.
  • We have no responsiblity for wrong shipping due to shipping address provided wrongly.
  • Normally, import taxes does not apply on samples and small quantities. However, if import duties, taxes and charges imposed, we are not responsible for these charges.
Delivery Time:

  • Items will be ship within 3 business days once full payment is settled.
  • The chart shown are not the actual time, they are only for your reference. Delivery time depends on the efficiency and performance of   the local post office and customs, We hope you can understand for the uncontrollable shipping time.

Country Delivery Time
United States 7-12 Working Days
United Kingdom     7-14Working Days
Canada 7-14Working Days
Australia 7-14Working Days
France 14-21 Working Days
Italy 14-21 Working Days
Spain 14-21 Working Days
Rest of Europe 14-21 Working Days
Asia 7-12 Working Days
South America 14-28 Working Days
Other countries 21-30 Working Days
         
        
Payment:

We only accept Paypal and we will ship out the items within three days after payment is confirmed


Replacement and Exchange

   1. Exchange/replace item within 7 days counting from the day you receive merchandise.
   2. Buyer will pay the return shipping cost regardless any reasons. No exception.
   3. Exchange/replace item if only item is in same condition as when we shipped out. No exception.
   4. Unwanted product returns will be subject to a 15% restocking fee and merchandise must be in the unused condition only.

Ratings and Feedback:

   1. When you receive the shipment and satisfied with the product, please leave us positive feedback and 5 STAR scores DSR. We will do the same for you.
   2. Please DO NOT open case with Ebay or leave neutral/negative feedback without any communication with us. If, for any reason you are not satisfied with your transaction, please contact us via Ebay Message or e-mail us and we will do our best to resolve the issue.


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.