4x AMD Opteron 8216 2.4GHz Dual Core Processors (4x Heatsinks Included)

16GB Memory

Riser Card RSC-RR1U-E16

AOC-SIMSO-Q Remote Management Card 

Product SKUs MBD-H8QME-2+-O H8QME-2+ (Standard Retail Pack) MBD-H8QME-2+-B H8QME-2+ (Bulk Pack)   Physical Stats Form Factor Proprietary Dimensions 16" x 13" (40.6cm x 33.2cm)   Processor/Chipset CPU Quad 1207-pin Socket F Supports up to four Six-Core / Quad-Core / Dual-Core AMD Opteron™ 8000 Series processors HT3.0 Link support ^ Chipset nVidia MCP55 Pro AMD 8132   System Memory Memory Capacity Sixteen 240-pin DIMM sockets Supports up to 128GB DDR2 800/667/533 MHz memory Single or Dual (recommended) channel memory support For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks Memory Type DDR2 800/667/533MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB, 8GB Memory Voltage 1.8V only Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices SATA nVidia MCP55 Pro SATA2 3.0Gbps Controller 6 SATA2 Ports nVidia RAID 2.0 SATA RAID 0, 1, 0+1, 5, JBOD Support IPMI Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMSO) (Optional: AOC-SIMSO R 3.00) NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot RMM (Remote Management Module) (Card not included) For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) Network Controllers Intel® 82546GB Dual Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Super I/O Winbond 83627HF VGA ATI ES1000 Graphics Controller 16MB Graphics & VGA port   System BIOS BIOS Type 8Mb Flash EEPROM with AMI® BIOS SST 49LF080A BIOS Chip BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3   Expansion Slots PCI-Express 1 x16 PCI-e Slots HyperTransport 1 HyperTransport (HTX) Connectors

Chassis ( Optimized for H8QME-2+ ) Chassis 1U CSE-818TQ+-1000 (Riser card : CSE-RR1U-E16 Rev.3.2) Important Chassis Notes To ensure system stability, a 1000W (minimum) ATX power supply [ 8-pin & 8-pin (+12V) and 24-pin are required]   Input / Output SATA 6 SATA2 ports IDE Single EIDE channel support up to two UDMA IDE devices Supports UDMA Mode 5 Supports PIO Mode 4 Supports ATA 100/133 Floppy 1 Floppy port; 1.44 MB support LAN 2 RJ45 LAN ports USB FUCI Up to 4 USB Ports 2.0 Compliant 2 Rear Ports 2 Internal Headers Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1 Fast UART 16550 serial ports 1 Header VGA 1 VGA port Others 1 SATA DOM power connector   Management Software Optional IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Watch Dog Power Configurations ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) headert Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery Internal/External modem remote ring-on   PC Health Monitoring CPU Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT CPU switching voltage regulator FAN Total up to 9-fan status tachometer monitoring Up to nine 3-pin fan headers Status monitor for speed control Support 3-pin fans with fan-speed control Low noise fan speed control Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support PC Temperature Sensing Logic LED CPU / System Overheat LED Suspend-State Indicator LED +5V Standby Alert LED Other Features Chassis Intrusion Detection Chassis Intrusion Header   Operating Environment / Compliance RoHS RoHS Compliant 5/6, Server Exemption Environmental Specifications Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing

30 Days Warranty!!!