A set of the product includes: a charger(with U.S 3-pin plug), 14 connectors(2.0 pin and 2.5pin), 2 connecting wires, and 2 jumper wires.







Functions:
This product is a portable charger for high capacity batteries of laptop
1. Charge your laptop battery directly.
2. Suitable for over 95% of laptops in market with the separate connecting wire.
3. With four LED lights to indicate the charge status.
4. Charge voltage and current can be regulated automatically.
5.
Simplify charging process, save your time and preserve your laptop,
especially when you own two batteries or your laptop cannot charge the
battery normally.
Basic Parameters
Safety Standard: CE standard
Input Voltage: AC 100~240V
Maximum output power: 40W
Standby power consumption: <1W
Output voltage: DC 7.2~14.8V
Maximum output current: 2.5A
Length of charging time: 8 hours MAX(Different charging time for batteries of different capacity)
Charging Instruction
1. Normal Working Condition:
Four
LED lights go on after switching on. The charger gains the battery
information from the battery protective plate, and then starts charging.
LED
Status
Capacity Percentage
All the four LEDs blink circularly <25%
LED1 is on. The other three LEDs blink circularly <50%
Both LED1 and LED2 are on. Both LED3 and LED4 blink circularly <75%
LED4 blinks. The other three LEDs are on <100%
All the four LEDs are on =100%
2. Activate Charging Condition:
The
four LEDs blink synchronously after switching on. It might be the
charger is not connected well with the battery. Users should check and
confirm the device is connected correctly.
One minute later, if the charger enters into normal working condition, it means the battery has been activated.
One minute later, if the four LEDs still blink synchronously, it means the battery has been damaged and can not be repaired.
Notice:
This professional universal laptop battery charger is only for those
who are very familiar with all kinds of laptop batteries and know well
the pins array of the different laptop batteries.Thanks:)