V4.0
You can build this sound module on the IMAX/FLYSKY/EURGLE/TURNIGY 9X RC radios and you can vocalize with help of ER9X Firmware.
After the alteration (in that languange what you want) it will speak (messages, telemetry data and signals will be heared as speaking).
Installation of 9XR out side link:
[link removed by eBay]
and
[link removed by eBay]
Do it yourself technology! The radio must has an ER9X FW, if you want to operate. In the kitt there are a MegaSound 9X tone generator and a mini loudspeaker.
You
need some threads thin insulated wires, a soldering-iron and a glue gun
for installation. During the work you don’t need to solder on thin SMD
pads!
You need some knowledge and exercise on electronics, if you want transmute. If you deficient in these, seek professional help!
Search for video in youtube (MegaSound 9X)!
Connect the pads, which are in the edges of the sound module, with soldering! You will need to solder ends of wire on the right places of the radio panel.
MegaSound 9X (dimension: 46×51×10 mm):
(MegaSound setup)
Don’t forget to install the sound set on the memory stick!
Use 22kHz, 16bit Wav sound files, SD card format FAT16 or FAT32.
Everyone evolve own radio at your own risk! We don’t assume any responsibility for the resulting damage!
Next info: MegaSound 9X update (FW)
More info: 9X Forum