NOTE: ANY QUESTIONS FOR THIS LISTING OR SHIPPING YOU CAN CALL TOLL FREE [phone removed by eBay] OR LOCAL [phone removed by eBay]

NEW

KR MACHINE VISE

DOES YOUR MACHINE VISE MEASURE UP?

OR IT JUST FLEXES AWAY. THE KR VICE IS IDEAL FOR BOTH CNC MANUAL MILLING MACHINES. VERY EFFICIENT DRAW CLAMP MECHANISM THE FRONT JAW IS STATIONARY. THE BACK JAW MOVES ALONG WITH THE SLIDE. THE ENTIRE CLAMPING FORCE TRANSFERS INTO HOLDING OF YOUR WORK PIECE. NOT INTO DISTORTING THE BODY OF THE VISE OR ANGLE LOCKING DOWN ONTO THE MOVING JAW.

-

SEE PICTURES FOR PROOF!

(a work piece was clamped into the vise, the 4 screws holding down the fixed jaw were removed and the whole CLAMPED ASSEMBLY was lifted out of the base)

NO STRESS, NO DISTORTION, NO LIFT!

These are features rarely found all in a single machine vise!

(MSRP is $750.00US)

-

THE WORK PIECE IS DRAWN “IN AND DOWN” TOWARDS THE FIXED JAW

Most other style vises on the market have a slide design that pushes and lifts the work piece.

 

THE KR VISE IS HEAT TREATED THROUGHOUT AND PRECISION GROUND

 

THE BASE IS MADE OF A SINGLE PIECE SOLID RIB ENFORCED CASTING

 

THE CLAMPING FORCES ARE IN THE THOUSANDS OF POUNDS

Please observe pictures of a coin squashed paper thin in the jaws of this vice!

 

THE KR VISE IS SO VERSATILE IT CAN BE USED IN A VARIETY OF SHOP APPLICATIONS. HOLDING PARTS IN PLACE ON A PUNCH PRESS OR CALMING PARTS TOGETHER.

EVEN RIVETING AND PUNCHING OPERATIONS

We use the vise in our prototype and research department as a MINI PRESS!

 

THIS AUCTION IS FOR THE KR PRO VICE AND HANDLE ONLY

READ ON FOR A DETAILED LIST OF SPECIFICATIONS FOR THE KR VISE! 

Technical Specifications:

 

Jaw Size 1.875”x 6” 

Opening 8”

Overall:  Height 5” Width 8” Length 25”

Weight 85lb

Packed weight is 90lb

 

Highlights of the Features:

 

KEYED JAWS to maintain perfect alignment.

 

Grooved Jaws for MAXIMUM GRIP.

 

The jaws have MOUNTING HOLES for soft jaws and side stops.

 

All HEAT TREATED and ground jaws and guide beam.

 

Low distortion cast SINGLE BODY BASE frame and sub plate

 

SIMPLE AND VERY UNIQUE CONSTRUCTION.

 

HEAVY DUTY

 

MINIMAL NUMBER OF COMPONENTS (Lean just made for RAW PAWA! All well sized, Heat Treated and ground to perfection. That about sums the ingredients needed for a first in class vise)

 

The ACME SCREW and CAST STEEL NUT provide a simple and durable tightening mechanism.

(Our oldest vise in the plant is used without replacing the screw or any of the components for over 16 years! We use over 15 of these vices daily in our manufacturing facility)

 

No Lift, No Lift and No Lift

(One of the pictures shows the vise with a 3” opening under clamping pressure holding a block without lifting.)

 

Even at extreme clamping forces the jaws will evenly deflect keeping your work piece PERFECTLY PARALLEL.

 

Minimal or NO HAMMERING REQUIRED to machine perfect work pieces with this vise.

- SHIPPING DETAILS -

FLAT RATES : This item is UPS STANDARD shipping is flat rate see above or email us your postal/zip code to have lower rate quoted.

 International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws.