|
This listing is for one 1 Gallon Rotopax Gas Container. Mounting system sold separately Dimensions 13 x 9 x 3.5 Weights 2.2lbs. empty, 8.2lbs. full Spout included Mounting kits sold separately Photos showing mounting options and additional packs are for illustrative purposes only. When you order from us, you are ordering straight from the manufacturer. We are the supplier to all of the dealers you see on eBay and on all websites. All of our products are made in the USA, at our factory in Northern Utah. RotopaX are patented in the USA. RotopaX Warranty Return Information All images and text ©2016 RotopaX/FuelpaX-a division of Rotopax Legacy LLC. All rights reserved. THE BASE LINE REQUIREMENT FOR VENTING YOUR ROTOPAX IS AT LEAST ONCE A DAY OR EVERY 10 DEGREES IN TEMPERATURE CHANGE AND EVERY 1,000 FEET IN ELEVATION CHANGE, AS YOU USE YOUR ROTOPAX YOU WILL LEARN MORE OF WHAT IS REQUIRED DEPENDING ON YOUR LOCATION AND NEEDS. IN SOME CASES YOU MAY NEED TO VENT MORE THAN ONCE A DAY. USING YOUR ROTOPAX IN ARES WITH HIGHER HEAT AND ELEVATIONS WILL REQUIRE MORE ATTENTION. TO VENT YOUR ROTOPAX YOU WILL JUST NEED TO LIGHTLY UNSCREW THE CAP TO ALLOW THE ROTOPAX TO "BREATH". WE ALSO RECOMMEND FILLING YOUR CONATINER AS FULL AS POSSIBLE TO LEAVE LESS ROOM FOR BUILD UP AS WELL AS THOROUGHLY WASHING OUT YOUR ROTOPAX BOTH WHEN YOU RECEIVE IT AND ANY TIME IT IS EMPTY AND STORED. THESE STEPS WILL HELP KEEP YOUR ROTOPAX IN THE BEST POSSIBLE CONDITION. PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE. Any modifications made to the container by the customer with products other than Rotopax mounting hardware and accessories will void the containers warranty (Ex. installing aftermarket venting devices, alteration to color of container, pressurized transfer systems, etc.) |